ITExamDump의 Oracle인증 1Z0-054덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 Oracle인증 1Z0-054덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 Oracle인증 1Z0-054덤프를 구매하시면 받을수 있습니다.
Oracle인증 1Z0-054시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 Oracle인증 1Z0-054덤프를 강추합니다. ITExamDump의Oracle인증 1Z0-054덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.
Oracle인증 1Z0-054시험을 패스하고 싶다면ITExamDump에서 출시한Oracle인증 1Z0-054덤프가 필수이겠죠. Oracle인증 1Z0-054시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이Oracle인증 1Z0-054시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한Oracle인증 1Z0-054덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의Oracle인증 1Z0-054공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면Oracle인증 1Z0-054시험패스가 어렵지 않고 자격증취득이 쉬워집니다.
Oracle인증1Z0-054시험의자격증은 여러분에 많은 도움이 되리라 믿습니다. 하시는 일에서 한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증취득 즉 재산을 얻었죠.Oracle인증1Z0-054시험은 여러분이 it지식테스트시험입니다. ITExamDump에서는 여러분의 편리를 위하여 ITExamDump만의 최고의 최신의Oracle 1Z0-054덤프를 추천합니다. ITExamDump를 선택은 여러분이 최고의 선택입니다. ITExamDump는 제일 전면적인Oracle 1Z0-054인증시험자료의 문제와 답을 가지고 잇습니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. Oracle인증 1Z0-054시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의Oracle인증 1Z0-054덤프로 자격증을 편하게 취득하는게 어떨가요?
ITExamDump에서 발췌한 Oracle인증 1Z0-054덤프는 전문적인 IT인사들이 연구정리한 최신버전 Oracle인증 1Z0-054시험에 대비한 공부자료입니다. Oracle인증 1Z0-054 덤프에 있는 문제만 이해하고 공부하신다면Oracle인증 1Z0-054시험을 한방에 패스하여 자격증을 쉽게 취득할수 있을것입니다.
시험 번호/코드: 1Z0-054
시험 이름: Oracle (Oracle Database 11g: Performance Tuning)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 192 문항
업데이트: 2014-01-26
1Z0-054 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-054.html
NO.1 You are working on a decision support system (DSS). The index is available on the COUNTRY_ID
column of the CUSTOMERS table.
View the Exhibit and examine the parameter settings and the query execution plan.
Why is the query using a full table scan instead of an index scan?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the index statistics for the index on the COUNTRY_ID column are not current
C. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a higher value
D. because the optimizer predicts that most of the blocks in the table are accessed. Therefore, it uses a
full table scan, even though indexes are available.
ANSWER: D
Oracle기출문제 1Z0-054 1Z0-054
NO.2 You are working on an online transaction processing (OLTP) system. By day most of the application
users perform queries accessing the most recently added or modified rows. The applications have most
of the queries based on multiple tables. But at night, some batch processing is also done.
Which two actions would you recommend to choose a goal for the optimizer based on the needs of your
application? (Choose two.)
A.setting the OPTIMIZER_MODE parameter to ALL_ROWS at the instance level
B.setting the OPTIMIZER_MODE parameter to FIRST_ROWS_n at the instance level
C.asking the developer to add a hint /*ALL_ROWS*/ in the long-running batch processing queries
D.asking the developer to add a hint /*FIRST_ROWS_n*/ in the long-running batch processing queries
ANSWER: BC
Oracle기출문제 1Z0-054 pdf 1Z0-054기출문제 1Z0-054 1Z0-054
NO.3 A user in a session executed the following SQL statement to set the optimizer mode:
ALTER SESSION SET OPTIMIZER_MODE = ALL_ROWS
What impact would it have on the goal of the optimizer for that session? (Choose all that apply.)
A. Statement level OPTIMIZER_MODE hints take precedence over the session-level setting.
B. The OPTIMIZER_MODE parameter set at instance level takes precedence over the session-level
value.
C. The optimizer uses a cost-based approach, regardless of the presence of statistics; it optimizes with a
goal of best response time.
D. The optimizer uses a cost-based approach for all SQL statements in the session, regardless of the
presence of statistics; it optimizes with a goal of best throughput.
ANSWER: AD
Oracle최신덤프 1Z0-054덤프 1Z0-054 1Z0-054시험문제 1Z0-054시험문제
NO.4 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
You notice that the one of the queries is using a full table scan (view Exhibit1) instead of index unique
scan (view Exhibit2). The index is present on the column that is accessed in the WHERE clause of the
query. The cost for a full table scan is more than that for an index unique scan.
Why would the optimizer choose full table scan over index unique scan? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a low value.
B. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a high value.
C. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a low value.
D. The statistics for the table and all the indexes associated with the table are not current.
ANSWER: BD
Oracle 1Z0-054덤프 1Z0-054
NO.5 You work as a DBA for a company and you have the responsibility of managing one of its online
transaction processing (OLTP) systems. The database encountered performance-related problems and
you generated an Automatic Workload Repository (AWR) report to investigate it further.
View the Exhibits and examine the AWR report.
What could be the problem in this database?
A.Java pool is not configured.
B.The CPU in the system is slow.
C.The shared pool size is inadequate.
D.The database buffer cache is inadequate.
E.The OPEN_CURSORS parameter is set to a small value.
ANSWER: C
Oracle 1Z0-054 pdf 1Z0-054 1Z0-054 1Z0-054최신덤프
NO.6 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
The index created on the column used in the WHERE clause of the query. You notice that the query is not
using the index. Instead of an index scan, a full table scan is used.
View the Exhibit and examine the autotrace output for a query.
What could be the reason for it? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter has a low value.
B. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter has a low value.
C. The statistics for the table and all the indexes associated with the table are not current.
D. The table has less than DB_FILE_MULTIBLOCK_READ_COUNT blocks under the high-water mark.
ANSWER: CD
Oracle덤프 1Z0-054덤프 1Z0-054
NO.7 View the Exhibit and examine a portion of the output obtained from the following query:
SQL> SELECT * FROM v$sys_time_model;
Select three correct interpretations of the time model statistics. (Choose three.)
A. DB time includes the wait time of all the nonidle and idle user sessions.
B. SQL execute elapsed time includes the time spent in performing fetches of query results.
C. DB CPU includes the CPU time spent on database user-level calls and background CPU time.
D. SQL execute elapsed time includes components of the hard parse elapsed time like bind elapsed time.
E. DB time includes the connection management call elapsed time excluding the background process
time.
ANSWER: BDE
Oracle 1Z0-054 pdf 1Z0-054 1Z0-054
NO.8 The columns CUST_CITY, CUST_STATE_PROVINCE, and COUNTRY_ID are frequently used
together in the WHERE clause of the queries. The CUSTOMERS table is a big table with 20 GB of data.
You notice that the selectivity for these three columns varies from the selectivity that the optimizer
calculates.
What would you recommend to influence the selectivity calculated by the optimizer?
A. creating function-based indexes by concatenating all the columns
B. updating histogram statistics for these columns by using the DBMS_STATS.GATHER_TABLE_STATS
procedure
C. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and create
index on the virtual column
D. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and the
DBMS_STATS.GATHER_TABLE_STATS procedure to collect statistics on the virtual column
ANSWER: D
Oracle자료 1Z0-054 1Z0-054시험문제
NO.9 You are working on an online transaction processing (OLTP) system. You detected free buffer waits
events for your database instance running in a machine that has multiple CPUs. You increased the
database buffer cache size as the first step. After a few hours of work on the database, further
investigation shows that the same event is being recorded.
What would be your next step to avoid this event in future?
A. Decrease the value of the DBWR_IO_SLAVES parameter.
B. Set the USE_INDIRECT_DATA_BUFFERS parameter to TRUE.
C. Increase the value of the DB_WRITER_PROCESSES parameter.
D. Increase the value of the DB_FILE_MULTIBLOCK_READ_COUNT parameter.
ANSWER: C
Oracle pdf 1Z0-054 pdf 1Z0-054 1Z0-054덤프
NO.10 Identify two correct statements about the Active Session History (ASH) data. (Choose two.)
A.A part of SGA memory is used to store ASH data as rolling buffer.
B.The ASH data can be analyzed between any two small time intervals.
C.All ASH data in memory are flushed to disk by MMON in every 3 seconds.
D.All ASH data in memory are flushed to disk by MMNL process whenever the buffer is full.
ANSWER: AB
Oracle 1Z0-054 dump 1Z0-054 1Z0-054 1Z0-054
NO.11 View Exhibit1 to examine the description of the CUSTOMERS table.
You observed that optimizer selectivity is not accurate when the CUST_STATE_PROVINCE and
COUNTRY_ID columns are used together in the WHERE clause of a query.
View Exhibit2 to examine the query execution plan and the commands executed to gather the statistics.
The optimizer predicts that 20 rows will be processed rather than the 3,341 rows, which is the actual
number of rows returned from the table.
What can you do to make the optimizer detect the actual number of rows?
A. Set the STATISTICS_LEVEL parameter to ALL.
B. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
C. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
D. Increase the STALE_PERCENT value for the CUSTOMERS table by using the
DBMS_STATS.SET_TABLE_PREFS procedure.
ANSWER: C
Oracle시험문제 1Z0-054기출문제 1Z0-054 1Z0-054 1Z0-054인증
NO.12 Which three factors influence the optimizer's behavior while choosing an optimization approach and
goal for a SQL statement? (Choose three.)
A.parsing of a SQL statement
B.operating system (OS) statistics
C.object statistics in the data dictionary
D.the OPTIMIZER_MODE initialization parameter
E.optimizer SQL hints for changing the query optimizer goal
ANSWER: CDE
Oracle 1Z0-054기출문제 1Z0-054덤프 1Z0-054 pdf 1Z0-054최신덤프
NO.13 View Exhibit1 and examine the indexes on the CUSTOMERS table.
The statistics for the CUSTOMERS table have been updated recently by using the following command:
SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS('SH','CUSTOMERS',method_opt=>'FOR ALL
INDEXED COLUMNS SIZE AUTO');
View Exhibit2 to examine a query plan. Even though the index is present on the COUNTRY_ID and
CUST_GENDER columns, the query uses a full table scan. What could be the reason?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a high value
C. because the optimizer calculates the cost of accessing blocks by using a full table scan to be less as
compared to index scans, even though indexes are available
D. because indexes on CUST_GENDER and COUNTRY_ID columns are of different types, the index on
the CUST_GENDER column is bitmap index, and on COUNTRY_ID columns is btree index.
ANSWER: C
Oracle dumps 1Z0-054 1Z0-054 pdf
NO.14 View the Exhibit exhibit1 to examine the series of SQL commands and parameter settings.
View the Exhibit exhibit2 to examine the plans available in the SQL plan baseline.
The first plan (in red) is created when OPTIMIZER_MODE is set to ALL_ROWS and the second plan (in
blue) is created when OPTIMIZER_MODE is set to FIRST_ROWS.
Which SQL plan baseline would be used if the SQL query in exhibit1 is executed again when the value of
OPTIMIZER_MODE is set to FIRST_ROWS?
A. the second plan, because it is a fixed plan
B. the first plan, because it is an accepted plan
C. the second plan, because it is the latest generated plan in FIRST_ROW mode
D. A new plan, because the second plan in FIRST_ROW mode is not an accepted plan
ANSWER: B
Oracle 1Z0-054 dumps 1Z0-054자료
NO.15 You plan to use adaptive thresholds as part of the performance tuning activity. You decide to increase
the window size of the default moving window baseline for all metric observations and comparisons in
your database. The following error occurs when you try to increase the window size through Enterprise
Manager:
Failed to commit: ORA-13541: system moving window baseline size (1296000) greater than retention
(1036800) ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 601 ORA-06512: at line 2
Which action would allow you to perform the preceding task successfully?
A. increasing the flashback retention period
B. increasing the retention period for SQL Management Base
C. increasing the undo retention period for the database instance
D. increasing the Automatic Workload Repository (AWR) retention period
ANSWER: D
Oracle기출문제 1Z0-054 1Z0-054 1Z0-054 1Z0-054시험문제 1Z0-054
NO.16 A batch workload that historically completed in the maintenance window between 10:00 PM and
midnight is currently showing poor performance and completing at 2 AM.
To help in the diagnosis of the performance degradation, the senior DBA in your organization asks you to
execute the awrddrpt.sql script to produce a Compare Periods report.
Which two statements are true about the report produced by this script? (Choose two.)
A. It is refreshed automatically based on the moving window baseline.
B. It compares details between any two selected time periods of the same duration.
C. It normalizes the statistics by the amount of time spent on the database for each time period.
D. It compares details between two consecutive time periods of the same or different durations and is
refreshed every 60 minutes.
ANSWER: BC
Oracle기출문제 1Z0-054 pdf 1Z0-054 dump 1Z0-054 pdf
NO.17 After running SQL Performance Analyzer (SPA), you observe a few regressed SQL statements in the
SPA output. Identify the two actions that you would suggest for these regressed SQL statements.
(Choose two.)
A.Running SQL Access Advisor
B.Adding them to SQL Plan Baseline
C.Submitting them to SQL Tuning Advisor
D.Running Automatic Database Diagnostic Monitor (ADDM)
ANSWER: BC
Oracle자격증 1Z0-054 1Z0-054자료
NO.18 You observed that some of the queries are performing poorly on the SALES_RECORDS table in your
database.
On further investigation, you find that at the end of each day the contents of the SALES_RECORDS table
are transferred to the SALES table and deleted from the SALES_RECORDS table. The deleted
operations cause the table to be sparsely populated.
You decided to use the ALTER TABLE...SHRINK SPACE COMPACT command to shrink the table.
Why would you choose this method? (Choose all that apply.)
A. because it can be used during peak hours
B. because it avoids unnecessary cursor invalidation
C. because it adjusts the high-water mark (HWM) immediately
D. because you have long-running queries that might span the shrink operation
E. because it does not allow any data manipulation language (DML) operations, thereby making the
shrink
operation faster
ANSWER: ABD
Oracle덤프 1Z0-054 dump 1Z0-054 1Z0-054인증
NO.19 You are working on a development database that was upgraded to Oracle Database 11g from Oracle
Database 9i. An ADDM finding in this database says that the shared pool is inadequately sized, as shown
in the Exhibit.
You diagnosed that this is due to different kinds of workloads and this occurs only during peak hours. You
tried to resize this by shrinking the database buffer cache but that caused inadequate buffer cache
problems. The following are the related parameter settings:
SQL> show parameter sga
NAME TYPE VALUE
------------------------------ --------------- -----------------
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 300M
sga_target big integer 0
SQL> show parameter target
NAME TYPE VALUE
------------------------------ --------------- -----------------
.....
fast_start_mttr_target integer 0
memory_max_target big integer 0
memory_target big integer 0
pga_aggregate_target big integer 100M
sga_target big integer 0
You want to balance the memory between the System Global Area (SGA) components within SGA
without affecting the size of the Program Global Area (PGA).
Which action would solve this problem?
A. Set the SGA_TARGET parameter to 300M.
B. Set the SGA_MAX_SIZE parameter to 400M.
C. Set the MEMORY_TARGET parameter to 100M.
D. Set the MEMORY_MAX_TARGET parameter to 300M.
ANSWER: A
Oracle dumps 1Z0-054 1Z0-054최신덤프 1Z0-054자격증
NO.20 View Exhibit1 to examine the description of the CUSTOMERS table.
The CUSTOMERS table has been updated heavily today. In a frequently used SQL statement, you notice
that estimated rows and the actual number of rows fetched differ greatly. The COUNTRY_ID column has
an index.
View Exhibit2 and examine the query execution plan.
What would you recommend to improve the optimizer's estimation?
A. setting the STATISTICS_LEVEL parameter to ALL
B. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE
C. creating extended statistics for the CUST_LAST_NAME, CUST_ID, and CUST_TOTAL columns
D. updating the statistics for the CUSTOMERS table by using the
DBMS_STATS.GATHER_TABLE_STATS
procedure
ANSWER: D
Oracle 1Z0-054 1Z0-054 1Z0-054최신덤프 1Z0-054최신덤프
ITexamdump의 70-417덤프의 VCE테스트프로그램과 700-104덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCP-510시험에 대비한 고품질 덤프와 70-410시험 최신버전덤프를 제공해드립니다. 최고품질 9L0-010시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.