ITExamDump의 인지도는 고객님께서 상상하는것보다 훨씬 높습니다.많은 분들이ITExamDump의 덤프공부가이드로 IT자격증 취득의 꿈을 이루었습니다. ITExamDump에서 출시한 SAP인증 C-TSCM42-64덤프는 IT인사들이 자격증 취득의 험난한 길에서 없어서는 안될중요한 존재입니다. ITExamDump의 SAP인증 C-TSCM42-64덤프를 한번 믿고 가보세요.시험불합격시 덤프비용은 환불해드리니 밑져봐야 본전 아니겠습니까?
ITExamDump의 SAP인증 C-TSCM42-64덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 SAP인증 C-TSCM42-64덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 SAP인증 C-TSCM42-64덤프만 공부하시면SAP인증 C-TSCM42-64시험을 패스하여 자격증을 취득할수 있습니다.
우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는SAP인증C-TSCM42-64시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
ITExamDump의 SAP 인증 C-TSCM42-64시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. SAP 인증 C-TSCM42-64덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.
ITExamDump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump의 SAP인증 C-TSCM42-64덤프는 업계에서 널리 알려진 최고품질의SAP인증 C-TSCM42-64시험대비자료입니다. SAP인증 C-TSCM42-64덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. ITExamDump의SAP인증 C-TSCM42-64덤프를 구매하시면 밝은 미래가 보입니다.
SAP C-TSCM42-64인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만C-TSCM42-64시험은SAP인증의 아주 중요한 시험으로서C-TSCM42-64시험패스는 쉬운 것도 아닙니다.
시험 번호/코드: C-TSCM42-64
시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-03-18
SAP인증 C-TSCM42-64시험을 패스하는 지름길은ITExamDump에서 연구제작한 SAP 인증C-TSCM42-64시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 SAP 인증C-TSCM42-64시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. SAP 인증C-TSCM42-64시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의SAP 인증C-TSCM42-64시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
C-TSCM42-64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TSCM42-64.html
NO.1 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP C-TSCM42-64 C-TSCM42-64 C-TSCM42-64
NO.2 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP덤프 C-TSCM42-64 C-TSCM42-64자격증
NO.3 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP덤프 C-TSCM42-64자료 C-TSCM42-64 C-TSCM42-64최신덤프 C-TSCM42-64 dumps
NO.4 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP기출문제 C-TSCM42-64 C-TSCM42-64덤프
NO.5 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP기출문제 C-TSCM42-64 C-TSCM42-64 dumps
NO.6 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP C-TSCM42-64최신덤프 C-TSCM42-64 C-TSCM42-64
NO.7 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP C-TSCM42-64 pdf C-TSCM42-64자격증
NO.8 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP C-TSCM42-64최신덤프 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64
NO.9 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP C-TSCM42-64 C-TSCM42-64 pdf
NO.10 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP dumps C-TSCM42-64 dumps C-TSCM42-64 C-TSCM42-64 C-TSCM42-64
ITexamdump의 CAT-500덤프의 VCE테스트프로그램과 ST0-202덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 646-365시험에 대비한 고품질 덤프와 000-587시험 최신버전덤프를 제공해드립니다. 최고품질 HP5-T01D시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기