IBM인증 A2090-544시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. IBM인증 A2090-544시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 IBM인증 A2090-544덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 IBM인증 A2090-544시험적중율이 최고입니다. IBM인증 A2090-544시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.
ITExamDump에서 제공해드리는 IBM인증 A2090-544덤프는 가장 출중한IBM인증 A2090-544시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. IBM인증 A2090-544덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?
모두 아시다시피IBM A2090-544인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.IBM A2090-544인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.
IBM 인증A2090-544인증시험공부자료는ITExamDump에서 제공해드리는IBM 인증A2090-544덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.
시험 번호/코드: A2090-544
시험 이름: IBM (Assessment: DB2 9.7 Advanced DBA for LUW)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2014-03-19
ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 IBM인증 A2090-544덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. IBM인증 A2090-544덤프는IBM인증 A2090-544최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.
IBM인증 A2090-544시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면IBM인증 A2090-544시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 IBM인증 A2090-544덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는IBM인증 A2090-544덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
A2090-544 덤프무료샘플다운로드하기: http://www.itexamdump.com/A2090-544.html
NO.1 How can you change an existing non-partitioned index for a partitioned table to a
partitioned index?
A. Use the ALTER INDEX command.
B. Use the DROP INDEX and CREATE INDEX commands.
C. Use the REORG INDEX command.
D. Use the ALTER INDEX and REORG INDEX commands.
Answer: B
IBM A2090-544 A2090-544 A2090-544
NO.2 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert the database?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: A
IBM A2090-544 A2090-544
NO.3 Table T1 was created by executing the following statement:
CREATE TABLE t1
(deptno CHAR(2) NOT NULL,
deptname VARCHAR(36) NOT NULL,
empno CHAR(3) NOT NULL)
Immediately after creation, table T1 was populated with 10 rows. Later, user USER1 ran an
application
that inserted 100,000 rows into table T1.
The following query is frequently ran against the T1 table:
SELECT deptno, empno, deptname FROM t1 WHERE deptno = 'EN' AND empno = '123'
Assuming current statics exist for the table and index, which index will provide optimal
performance for
this query?
A. CREATE INDEX idx1 ON t1 (deptno, empno) INCLUDE (deptname)
B. CREATE INDEX idx1 ON t1 (deptno, empno)
C. CREATE INDEX idx1 ON t1 (deptno) INCLUDE (empno)
D. CREATE INDEX idx1 ON t1 (deptno)
Answer: B
IBM dumps A2090-544 A2090-544 A2090-544
NO.4 A database named MYDB was created by executing the following command:
CREATE DATABASE mydb AUTOMATIC STORAGE NO
Later, a decision is made to modify this database so that both it and its table spaces use
automatic
storage.
What steps are required to make this modification?
A. Use the ALTER DATABASE command to convert the database; all existing table spaces
will be
converted automatically.
B. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing table spaces.
C. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing SMS table spaces.
D. Use the ALTER DATABASE command to convert the database; use the ALTER
TABLESPACE
command to convert all existing DMS table spaces.
Answer: D
IBM A2090-544 A2090-544
NO.5 Given the following statements:
CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE :\myfile1?1000,
FILE
:\myfile2?800);
ALTER TABLESPACE mytbsp EXTEND (FILE :\myfile1?200, FILE :\myfile2?400);
How large are the containers MYFILE1 and MYFILE2?
A. MYFILE1 = 200 pages, MYFILE2 = 400 pages
B. MYFILE1 = 1200 pages, MYFILE2 = 1000 pages
C. MYFILE1 = 1400 pages, MYFILE2 = 1200 pages
D. MYFILE1 = 1200 pages, MYFILE2 = 1200 pages
Answer: D
IBM dumps A2090-544 dump A2090-544 A2090-544시험문제
NO.6 Assuming the following commands are executed in the order shown:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE 'C:\file1' 1 M, FILE 'C:\file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
CREATE TABLE tab_a (c1 INT, c2 CHAR(30), c3 XML) COMPRESS YES;
IMPORT FROM data.del OF DEL INSERT INTO tab_a;
If the following command is executed:
ALTER DATABASE mydb ADD STORAGE ON ?mnt/file_1? ?mnt/file_2?
Which statement is true?
A. The ALTER DATABASE command will fail because database MYDB was not created as
an automatic
storage database.
B. The ALTER DATABASE command will convert database MYDB to an automatic storage
database, and
table space TBSP1 will automatically be converted to an automatic storage table space.
C. Table space TBSP1 can be converted to an automatic storage table space at any time by
executing the
ALTER TABLESPACE statement.
D. Table space TBSP1 will be placed in Conversion Pending?state and must be converted to
an
automatic storage table space before it can be used.
Answer: C
IBM시험문제 A2090-544자료 A2090-544
NO.7 Considering you have an OLTP workload consisting of similar queries that are
repeatedly generated
and differ only in their predicate values, what can be done to reduce compilation overhead?
A. UPDATE DB CFG USING STMT_CONC LITERALS
B. UPDATE DB CFG USING SQL_CONC LITERALS
C. UPDATE DB CFG USING SQL_CONC YES
D. UPDATE DB CFG USING STMT_CONC OFF
Answer: A
IBM A2090-544인증 A2090-544 A2090-544 A2090-544
NO.8 Which command produced the result shown below?
Tracking Memory on: 2010/02/18 at 21:18:19
Memory for database: SAMPLE
bph (2) utilh pckcacheh catcacheh bph (1) bph (S32K) bph (S16K)
4.2M 64.0K 256.0K 64.0K 288.0M 704.0K 448.0K
bph (S8K) bph (S4K) shsorth lockh dbh other
320.0K 256.0K 64.0K 10.0M 4.7M 128.0K
A. db2mtrk -i
B. db2mtrk -d
C. db2mtrk -p
D. db2mtrk -a
Answer: B
IBM dumps A2090-544 A2090-544 A2090-544기출문제 A2090-544
NO.9 Which action can be performed by the ALTER TABLESPACE statement?
A. Change an SMS table space to a DMS table space on any database partition.
B. Change the size of a container in an SMS table space.
C. Change the EXTENTSIZE setting for a table space on a database partition that currently
has no
containers.
D. Add a container to an SMS table space on a database partition that currently has no
containers.
Answer: D
IBM A2090-544 A2090-544 A2090-544
NO.10 What is a method for enabling non-buffered I/O at the table space level in a DB2
database?
A. Set the DB2_DIRECT_IO configuration parameter to YES.
B. Set the DB2_FILESYSTEM_CACHE configuration parameter to YES.
C. Use the USE DIRECT IO clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
D. Use the NO FILE SYSTEM CACHING clause with the CREATE TABLESPACE or ALTER
TABLESPACE command.
Answer: D
IBM덤프 A2090-544최신덤프 A2090-544 A2090-544덤프
NO.11 A table space has been created in the default database partition group.
What must you do to change the partition group for that table space?
A. Export the table space and reload it into the new partition group.
B. Move the table space to the new partition group as parameters.
C. Drop the table space and re-create it in the new partition group.
D. Alter the table space, specifying the new partition group.
Answer: C
IBM A2090-544 A2090-544자료 A2090-544 A2090-544
NO.12 A DBA wants to create table space named MYTBLSP in a database with five
partitions.
Which command will create the table space on all five partitions?
A. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P$NODES'
5000)
B. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P0' to
'/tbsp/cont1P4' 5000)
C. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE
'/tbsp/cont1P[0-4]' 5000)
D. CREATE TABLESPACE mytblsp MANAGED BY DATABASE USING (FILE '/tbsp/cont1P
$N' 5000)
Answer: D
IBM A2090-544 A2090-544 A2090-544인증
NO.13 A database and a table space were created using the following commands:
CREATE DATABASE mydb AUTOMATIC STORAGE NO;
CONNECT TO mydb;
CREATE TABLESPACE tbsp1
MANAGED BY DATABASE USING (FILE '/mnt/file1' 1 M, FILE '/mnt/file2' 1 M)
AUTORESIZE YES
INCREASESIZE 2 M
MAXSIZE 100 M;
$>?
Afterwards, two tables were created in table space TBSP1 and both tables were populated
with 100,000
rows. If a DBA decides that database MYDB should use automatic storage, which
command(s) are
needed to convert both the database and table space TBSP1?
A. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
B. ALTER DATABASE mydb ADD STORAGE ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
C. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
D. ALTER DATABASE mydb AUTOMATIC STORAGE YES ON ?mnt/path_1? ?mnt/path_2?
ALTER TABLESPACE tbsp1 MANAGED BY AUTOMATIC STORAGE;
Answer: B
IBM인증 A2090-544자료 A2090-544자료
NO.14 A DBA needs to create a federated database and configure access to join data from
three Oracle
instances and one DB2 database.
Which objects are needed to establish the specified connections?
A. 1 Oracle server , 1 DB2 server , 3 Oracle wrappers , and nicknames for each database
B. 1 Oracle server , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each database
C. 3 Oracle servers , 1 DB2 server , 3 Oracle wrappers , 1 DB2 wrapper , and nicknames for
each
database
D. 3 Oracle servers , 1 DB2 server , 1 Oracle wrapper , 1 DB2 wrapper , and nicknames for
each
database
Answer: D
IBM dumps A2090-544 A2090-544 A2090-544인증
NO.15 A table named TAB_A was created with the COMPRESS YES option specified and
populated with
100,000 rows. If a DBA wants to create an index on table TAB_A, which statement is true?
A. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option with the CREATE INDEX statement that is used to create it.
B. The index will automatically be compressed since the table it is associated with is
compressed; the
ALTER INDEX command does not have to be executed.
C. In order for the index to be compressed, it must be enabled for compression by specifying
the
COMPRESS YES option in the CREATE INDEX statement used to create it; however, the
index will not
be compressed until the ALTER INDEX command is used to create an index compression
dictionary.
D. The index will automatically be enabled for compression because the associated table is
compressed;
however, the index will not be compressed until it is REORGed.
Answer: B
IBM A2090-544 A2090-544 A2090-544 A2090-544자격증
NO.16 Given a newly created database and sufficient memory. If the following statements are
successful:
CREATE BUFFERPOOL bp1 SIZE 40MB;
CREATE BUFFERPOOL bp2 PAGESIZE 16K SIZE 40000;
How much memory will be allocated for buffer pools BP1 and BP2?
A. 40MB
B. 80MB
C. 665MB
D. 680MB
Answer: C
IBM인증 A2090-544자격증 A2090-544 A2090-544기출문제 A2090-544덤프
NO.17 if table space TBSP1 is using automatic storage, and the existing storage paths are
full, which
command would increase the available storage?
A. ALTER DATABASE ADD STORAGE ON '/db2/filesystem1'
B. ALTER TABLESPACE tbsp1 ADD ('/db2/filesystem1')
C. ALTER DATABASE ADD STORAGE FOR tbsp1 ('/db2/filesystem1')
D. ALTER TABLESPACE tbsp1 EXTEND USING ('/db2/filesystem1')
Answer: A
IBM자료 A2090-544자격증 A2090-544 dump A2090-544
NO.18 Database DB1 is defined on partitions 1 through 4, with the system catalog defined on
partition 2. This
database is configured with LOGRETAIN=YES and TRACKMOD=YES. On Sunday evening,
a full online
database backup completes successfully on all partitions. On Monday afternoon, a new table
space is
created in a database partition group defined on partitions 3 and 4. On Monday evening a
backup is
executed as follows :
BACKUP DATABASE db1 ONLINE INCREMENTAL
What are the results of this operation?
A. The backup completes successfully on the catalog partion only.
B. The backup completes successfully on database partitions 1 and 2, but fails on database
partitions 3
and 4.
C. The backup completes successfully on database partitions 3 and 4, but fails on database
partitions 1
and 2.
D. The backup completes successfully on all database partitions.
Answer: B
IBM최신덤프 A2090-544 dump A2090-544덤프 A2090-544 dumps A2090-544
NO.19 Given the following table spaces, their associated page size, and number of pages:
TSP1 - 16K page size, 10000 pages
TSP2 - 8K page size, 10000 pages
TSP3 - 4K page size, 20000 pages
USERSPACE1 - 4K page size, 5000 pages
Which sets of buffer pools will ensure that all of the data in the table spaces will be fit into
memory for
optimal data access?
A. IBMDEFAULTBP - 16K page size, 85000 pages
B. IBMDEFAULTBP - 4K page size, 25000 pages
BP1 -16K page size, 20000 pages
C. BP1 - page size 8K, 45000 pages
D. BP1 - 4K page size, 30000 pages
BP2 - 8K page size, 20000 pages
BP3 - 16K page size, 15000 pages
Answer: D
IBM A2090-544 A2090-544 A2090-544
NO.20 You have a database with eight partitions on a single server. Immediately after
executing the following
command:
CREATE BUFFERPOOL mybp DEFERRED SIZE 3000
How much memory is consumed by buffer pool MYBP on the server?
A. 0 pages
B. 3000 pages
C. 24000 pages
D. 192000 pages
Answer: A
IBM A2090-544 A2090-544자격증 A2090-544 dump
ITexamdump의 HP2-N44덤프의 VCE테스트프로그램과 VCP510-DT덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CUR-011시험에 대비한 고품질 덤프와 000-274시험 최신버전덤프를 제공해드립니다. 최고품질 C_ISR_60시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기