2014년 2월 24일 월요일

Microsoft 인증 70-681 덤프

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. Microsoft인증 70-681덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Microsoft인증 70-681덤프 적중율과 패스율은 100% 보장해드립니다. Microsoft인증 70-681시험에 도전하려는 분들은ITExamDump 의Microsoft인증 70-681덤프로 시험을 준비할것이죠?

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 70-681관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

네트웨크시대인 지금 인터넷에 검색하면 수많은Microsoft인증 70-681시험공부자료가 검색되는데 그중에서도ITExamDump에서 출시한 Microsoft인증 70-681덤프가 가장 높은 인지도를 지니고 있습니다. Microsoft인증 70-681덤프에는Microsoft인증 70-681시험문제의 기출문제와 예상문제가 수록되어있어 덤프에 있는 문제만 잘 공부하시면 시험은 가볍게 패스가능합니다. Microsoft인증 70-681시험을 통과하여 자겨증취득하는 꿈에 더욱 가까이 다가가세요.

ITExamDump 에서 출시한 제품 Microsoft인증70-681시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된Microsoft인증70-681덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.

시험 번호/코드: 70-681
시험 이름: Microsoft (TS: Windows 7 and Office 2010, Deploying)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 85 문항
업데이트: 2014-02-23

70-681 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-681.html

NO.1 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft   70-681인증   70-681   70-681기출문제   70-681인증

NO.2 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft pdf   70-681인증   70-681자료

NO.3 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft dump   70-681인증   70-681   70-681

NO.4 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft   70-681   70-681인증   70-681   70-681

NO.5 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft덤프   70-681   70-681자료   70-681   70-681 pdf

NO.6 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft기출문제   70-681   70-681   70-681   70-681

NO.7 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft   70-681   70-681 dump   70-681인증   70-681   70-681시험문제

NO.8 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft시험문제   70-681   70-681 dumps   70-681   70-681 dumps

NO.9 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft최신덤프   70-681   70-681   70-681

NO.10 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft자료   70-681 pdf   70-681

NO.11 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft자격증   70-681 dump   70-681

NO.12 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft dumps   70-681자료   70-681 dump   70-681 dump

NO.13 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft기출문제   70-681인증   70-681자료

NO.14 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft최신덤프   70-681덤프   70-681   70-681인증

NO.15 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft   70-681   70-681   70-681

ITexamdump의 C4040-224덤프의 VCE테스트프로그램과 70-342덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CD0-001시험에 대비한 고품질 덤프와 CAT-440시험 최신버전덤프를 제공해드립니다. 최고품질 000-318시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-681.html

댓글 없음:

댓글 쓰기