빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Microsoft 70-462인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
ITExamDump의 Microsoft인증 70-462덤프를 선택하여Microsoft인증 70-462시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고Microsoft인증 70-462시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. Microsoft인증 70-462덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 70-462시험은 무조건 패스해야 합니다. 하지만Microsoft인증 70-462시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Microsoft인증 70-462시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Microsoft인증 70-462덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Microsoft인증 70-462영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: 70-462
시험 이름: Microsoft (Administering Microsoft SQL Server 2012 Databases)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2014-02-11
IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의Microsoft인증 70-462덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된Microsoft인증 70-462덤프를 1년간 무료로 업데이트서비스를 드립니다.
우리ITExamDump 사이트에서Microsoft 70-462관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.
70-462 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-462.html
NO.1 DRAG DROP
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC.
ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.2 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
The differential backup of the reporting database fails. Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
B. Perform a point-in-time restore.
C Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
E. Restore the latest full backup. Then, restore the latest differential backup.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a page restore.
H. Perform a partial restore.
Answer: C
Microsoft자료 70-462자료 70-462 70-462
NO.3 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on
the transactional database. You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Perform a point-in-time restore.
D. Restore the latest full backup.
E. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
F. Perform a page restore.
G. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: F
Microsoft 70-462 70-462시험문제 70-462
NO.4 You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis.
Which configuration should you use?
A.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
BSQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
DTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.SQL Server that includes an application database configured to perform snapshot replication
F.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
Answer: E
Microsoft 70-462덤프 70-462최신덤프
NO.5 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
B. Perform a partial restore.
C. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
D. Perform a point-in-time restore.
E. Restore the latest full backup.
F. Perform a page restore.
G. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft자료 70-462 70-462기출문제 70-462인증
NO.6 You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs. Your primary replica is available at
Server01\Contoso01.
You need to configure the availability group to have the highest availability. You also need to ensure that
no data is lost.
Which Transact-SQL statement should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Microsoft자격증 70-462 70-462기출문제 70-462최신덤프 70-462 70-462자료
NO.7 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if
any of the servers fail. You also need to minimize the amount of storage used by the database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.SQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.SQL Server that includes an application database configured to perform snapshot replication
H.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: H
Microsoft dumps 70-462인증 70-462 70-462 pdf
NO.8 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be
off-loaded from the primary database to another server. You also need to be able to add indexes to the
secondary database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.SQL Server that includes an application database configured to perform transactional replication
G.SQL Server that includes an application database configured to perform snapshot replication
HTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: F
Microsoft기출문제 70-462 dump 70-462 70-462자격증 70-462
NO.9 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?
A.SQL Server that includes an application database configured to perform transactional replication
B.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.SQL Server that includes an application database configured to perform snapshot replication
E.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
Answer: A
Microsoft 70-462 70-462자격증 70-462
NO.10 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on
the reporting database.
You need to ensure that the databases are restored. You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
E. Perform a page restore.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a point-in-time restore.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft 70-462덤프 70-462 70-462
ITexamdump의 EX0-001덤프의 VCE테스트프로그램과 C_TADM51_70덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-784시험에 대비한 고품질 덤프와 HP0-J62시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-J67시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기