VMware인증 VCAP5-DCD시험준비중이신 분들은VMware인증 VCAP5-DCD시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히VMware VCAP5-DCD관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재VMware VCAP5-DCD인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.
ITExamDump의 VMware인증 VCAP5-DCD덤프를 선택하여VMware인증 VCAP5-DCD시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고VMware인증 VCAP5-DCD시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. VMware인증 VCAP5-DCD덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
VMware인증VCAP5-DCD시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은VMware인증VCAP5-DCD시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.
VMware VCAP5-DCD인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.VMware VCAP5-DCD시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테VMware VCAP5-DCD시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의VMware VCAP5-DCD시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
시험 번호/코드: VCAP5-DCD
시험 이름: VMware (VMware Certified Advanced Professional 5 - Data Center Design (VCAP5-DCD))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 279 문항
업데이트: 2013-12-09
ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.VCAP5-DCD인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는VCAP5-DCD관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의VCAP5-DCD문제와 답을 제공합니다.
VMware VCAP5-DCD인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만VCAP5-DCD시험은VMware인증의 아주 중요한 시험으로서VCAP5-DCD시험패스는 쉬운 것도 아닙니다.
VCAP5-DCD 덤프무료샘플다운로드하기: http://www.itexamdump.com/VCAP5-DCD.html
NO.1 In the project life cycle, the ____________ defines the vision.
A. IT architect
B. software vendor
C. business
Answer: C
VMware dumps VCAP5-DCD VCAP5-DCD pdf VCAP5-DCD
Explanation:
By reviewing the current configuration of a system and mapping the final status of components
asdescribed in the vision, the business identifies the gap between the two. A gap state analysis is a
review of theitems or tasks that are required to progress between the stages. Such an analysis is
useful in creatingmilestone plans, implementation orders, and so on. Chapter 2, Gathering
Information and Spotting the Gaps
NO.2 You are working on a hybrid cloud project, where production applications (yet to be fully
developed) are to be deployed. Which of the following is a project requirement?
A. The production data must be in the UK at all times.
B. The hosting partner provides sufficient resources without overcommitment to support
application load.
C. The hosting provider meets uptime expectations.
D. The development team provides the software on time.
Answer: A
VMware dump VCAP5-DCD VCAP5-DCD VCAP5-DCD기출문제
Explanation:
A requirement is a definable and measurable project item. It must be part of the delivery, and
itsremoval cannot be justified. Chapter 2, Definitions of Key Terms
NO.3 You are the technical designer for a vSphere platform transformation project. After
conducting SME interviews and using various platform information-gathering methods, you have
created a high-level design document.
This document specifies the following:
Requirements:
R1. The solution must not have a single point of failure.
R2. Production applications must not have an outage of more than 10 seconds.
R3. Data must be based in the UK.
R4. There is a 7-year retention policy for contracts.
R5. Applications should support existing and developing workloads for the next 3 years' growth.
Spec of servers:
Web 1 vCPU, 2 GB RAM, 100 GB storage App 1 vCPU, 4 GB RAM, 100 Gb storage
DB 2 vCPU, 16 GB RAM, 750 Gb storage
At a late stage in the software development life cycle of a production application developed inhouse,
an unfortunate issue was identified when the application was deployed to the production vSphere
cluster. The production core stacked switch has capacity issues, and this is having a serious impact
on all applications for which the switch is providing network services. Within the test system, the
application works as intended in the single test VLAN and with a single-host configuration.
Which of the following could be tried to help in this situation, from a vSphere perspective? (Choose
two)
A. Redevelop the application for a virtual platform
B. Place the application into a single-vApp network
C. Add DRS rules to keep network traffic within the same host, where possible
D. Configure network I/O control
Answer: B,D
VMware VCAP5-DCD VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
If you limit the application traffic to a specific dedicated network (that is, a separate VLAN) andusing
enforced DRS affinity rules, the application traffic will not traverse the ESXi host's physical
networkinterfaces. This will ensure that the impact of the application is minimized, while also
ensuring that theapplication itself is not limited. The application servers already have vCPU settings.
This suggests that the system has already beingvirtualized in both types of environments. Network
I/O control could be useful in the event of contention, but therole of a designer would be to plan to
prevent contention where possible; other options would be morebeneficial. In addition,
Requirement 5 specifies that the system should work with workloads over the next 3years. Network
I/O control would suggest contention very early in the platform history. Chapter 4, NetWork -
Logical and Physical Design to allow applications to flow
NO.4 Storage DRS can be enabled and can balance I/O levels based on _______________
A. real-time stats
B. historical stats
Answer: B
VMware최신덤프 VCAP5-DCD VCAP5-DCD최신덤프 VCAP5-DCD VCAP5-DCD인증 VCAP5-DCD pdf
Explanation:
Storage DRS can balance I/O by using storage vMotion. This would be based on historical valuesfor a
period of time.
Storage DRS would make decisions based on these figures. If the system were using realtimestats,
the machines could potentially migrate a lot more. This could have an effect on the latency
figuresfor some systems. The larger historical sampling in storage DRS allows the system to make a
decision withlimited risk of impacting I/O-unlike moving a virtual machine over and over again.
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.5 Storage DRS is enabled by default.
A. True
B. False
Answer: B
VMware자료 VCAP5-DCD최신덤프 VCAP5-DCD
Explanation:
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.6 A DR project requires a recovery time objective (RTO) of 4 hours and has a recovery point
objective (RPO) of 2 hours. The system fails at 8 p.m. on a Sunday evening. At what time is the
application expected to be available to the end users?
A. Midnight
B. 10 p.m.
C. 2 a.m.
D. 11 p.m.
Answer: A
VMware자격증 VCAP5-DCD VCAP5-DCD최신덤프 VCAP5-DCD VCAP5-DCD VCAP5-DCD최신덤프
Explanation:
The recovery time objective (RTO)-also known as the return to operation-is the amount of timeit
takes to restore a service after a failure has taken place. The recovery point objective (RPO) is the
point intime to which the system needs to be restored following a failure.
Chapter 3, RTO, RPO, and All That Stuff?
NO.7 A logical design can contain which of the following? (Choose three)
A. BIOS settings
B. Data flow
C. Key component relationships
D. High-level diagrams
E. Server host names
Answer: B,C,D
VMware VCAP5-DCD기출문제 VCAP5-DCD기출문제 VCAP5-DCD
Explanation:
A logical diagram can be used to show service components and how they relate to each other.
Alogical diagram is high level in nature and is independent of the hardware used for a solution.
Chapter 2, Presenting the Data Gathered
NO.8 Based on the information in the high-level design extract from question 2, what storage
protocol is unsuitable?
A. NFS
B. iSCSI
C. FC
Answer: A
VMware dumps VCAP5-DCD VCAP5-DCD기출문제 VCAP5-DCD
Explanation:
The requirements state that the application uptime requirements would not be met if using vSphere
HA alone. vSphere HA would invoke a restart of guest virtual machines after at least 10 seconds.
VMware fault tolerance would meet the uptime requirements; a failover would result in zero
downtime of theapplication. This technology can be used only with VMFS; therefore, NFS cannot be
used in this design. Chapter 4, NetWork - Logical and Physical Design to allow applications to flow
NO.9 Based on the information in the high-level design extract for question 2, which type of data
store would be required?
A. VMFS
B. NFS
Answer: A
VMware시험문제 VCAP5-DCD pdf VCAP5-DCD자격증 VCAP5-DCD
Explanation:
Because fault tolerance would be the only VMware technology that would meet the
technicalrequirements, VMFS is the only choice here. Chapter 4, Storage Design - The Logical &
Physical Approaches
NO.10 When designing a storage platform, which of the following should be considered as part of
the overall design?
A. Capacity
B. I/O requirements of the applications to be supported
C. Disk latency tolerance
D. Growth rate
E. All of the above
Answer: E
VMware VCAP5-DCD자격증 VCAP5-DCD pdf
Explanation:
A storage platform logical design requires in-depth analysis of factors that can affect applications. In
the case of storage, aspects that relate to the physical layer-such as the amount of usable space
requiredfor services; the size, number, and speed of disks; and how fast the data is being
produced-could have asubstantial impact to the storage platform. Chapter 4, Storage Design - The
Logical & Physical Approaches
NO.11 You are a VMware architect employed to design and build application environments and the
underlying platform for a software development company. The company is using a "devops"
approach and has engaged with you at the beginning of the first planning meeting/pre-sprint.
The software has yet to be written. However, you have some high-level specifications that are
subject to change at each of the early meetings.
The ______ is more logical for virtual machine sizing.
A. predictive sizing approach based on current software
B. adaptive sizing approach
Answer: B
VMware기출문제 VCAP5-DCD시험문제 VCAP5-DCD VCAP5-DCD기출문제 VCAP5-DCD기출문제
Explanation:
There are two types of scaling approaches in virtual platforms: adaptive and predictive.
Bothapproaches are usable; however, a designer must work out which is the best approach for
each project.
The adaptive approach to guest virtual machine design is a major advantage that virtualization
technologybrings to a datacenter. It allows a guest virtual machine to be created initially on a few
metrics or high-levelrequirements (such as a limited budget) and scaled (that is, grown, not shrunk)
through the virtual machine lifecycle. In many cases, this scaling can be performed hot/live without
outage/downtime to the runningapplications. The predictive approach, on the other hand, requires
more planning and research, and you must know themetrics before deployment. The advantage
here is that once the virtual machine has been deployed, onlyapplication maintenance is required.
The application requirements are known. Chapter 5, Design Approaches
NO.12 A project requirement _______________
A. must be achieved
B. can be set as aspirational but may never be achieved
Answer: A
VMware인증 VCAP5-DCD VCAP5-DCD VCAP5-DCD VCAP5-DCD자격증 VCAP5-DCD pdf
Explanation:
A project requirement is a specific deliverable that the business has said must be provided at
theend of a project.
It must always be achieved. Chapter 4, Storage Design - The Logical & Physical Approaches
NO.13 The vCenter database is powered off ungracefully, along with a three cluster nodes in a
separate cluster.
Will the failed existing ESXi host nodes restart correctly using Auto Deploy?
A. Yes
B. No
Answer: A
VMware인증 VCAP5-DCD기출문제 VCAP5-DCD덤프 VCAP5-DCD VCAP5-DCD덤프
Explanation:
Auto Deploy enables an untrained IT professional to increase capacity while ensuring quality
andconsistency within a cluster.
However, there is a dependency on the vCenter server and Auto Deploy serverroles at different
times.
In this case, the ESXi hosts have already booted successfully.
This means that allsubsequent reboots will be controlled using configuration from the Auto Deploy
server, not vCenter.
If thevCenter database is impacted, the ESXi hosts will automatically restore.
Even in the event of no vCenteravailability, hosts will use the last-known copy of a distributed switch
or the configured vSphere switch.
Chapter X, Putting it all together
NO.14 You are a virtualization consultant working on a DR project. You have proposed a solution that
uses SAN replication technology to replicate production virtual machine files. This meets the cold
standby requirement.
Which of the following could be a design constraint?
A. The hardware currently being used in the datacenter is out of support.
B. The company is undecided about the choice of centralized storage to be used in the enterprise.
C. The company is at the end of year 1 of a 3-year contract for the point-to-point link between Site A
and Site
D. This link is currently 10 MB.
Answer: C
VMware VCAP5-DCD자료 VCAP5-DCD
Explanation:
An item from the current state analysis that would restrict or change a design choice is potentiallya
constraint. Such factors can limit a design and in some cases prevent the realization of a project
vision. Chapter 2, Gathering Information and Spotting the Gaps
NO.15 You are a technical consultant designing a solution for an online retail company. The project
vision is to deploy a hybrid cloud, with the internal team developing the website on internal
infrastructure and migrating production-ready applications to a hosting provider. The project is
expected to ease deployment and require less infrastructure capital expenditure-without lowering
application quality.
Which of the following is a risk to the project?
A. The solution must adhere to ISO 27001.
B. Change control of the hosting vCloud platform is not under full control of the internal business.
C. The hosting provider outsources the platform support to the platform vendor.
D. The applications to be deployed on the production hosts are not fully developed, although a beta
exists.
Answer: B
VMware자격증 VCAP5-DCD VCAP5-DCD최신덤프 VCAP5-DCD인증
Explanation:
The technical design process enables the platform designer to work in a methodical way and
withothers who have similar objectives. A risk is that a project item could potentially prevent the
vision or aspectsof it (requirements) from being created. Chapter 1, The Technical Design Process
NO.16 A(n) _____________ is an item that is taken to be true in the design phases but has not been
tested prior to execution.
A. requirement
B. constraint
C. assumption
D. risk
Answer: C
VMware시험문제 VCAP5-DCD인증 VCAP5-DCD VCAP5-DCD dumps VCAP5-DCD dump
Explanation:
An assumption could impact your design. It is good to ensure that project team and widerbusiness
are aware of assumptions and that they are agreed and validated as part of the design
considerationprocess. Chapter 2, Gathering Information and Spotting the Gaps
NO.17 A best practice can change over time.
A. True
B. False
Answer: A
VMware덤프 VCAP5-DCD덤프 VCAP5-DCD
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices can change overtime.
Chapter 6, Validation, Thoughts, and Processes
NO.18 Only a software vendor develops a standard process or configuration.
A. True
B. False
Answer: B
VMware VCAP5-DCD VCAP5-DCD
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices may berecommended by non-vendor-related people.
It is up to a designer to validate this information rather thanignore it straightaway. Chapter 6,
Validation, Thoughts, and Processes
19. A logical diagram shows vendor-specific information.
A. True
B. False
Answer: B
VMware VCAP5-DCD VCAP5-DCD dump VCAP5-DCD덤프
Explanation:
A logical diagram shows the high-level components of a design or platform. It may
includedescriptions such as data flow and entity relationships.
However, it does not show specific vendors (such asDell or HP). Chapter 2, Creating the design
20. Which of the following vSphere cluster technologies would meet the application
requirements specified in the high-level design extract for question 2?
A. FT
B. HA
Answer: A
VMware VCAP5-DCD VCAP5-DCD pdf VCAP5-DCD VCAP5-DCD
Explanation:
vSphere HA would need to wait at least 10 seconds before a restart would be possible. Thiswould
not meet requirements. In the event of a restart, it could be possible to be without the application
feeddatabase for about 15 minutes. VMware FT would enable the service to be provided without
additionalredevelopment. Chapter 4, Storage Design - The Logical & Physical Approaches
ITexamdump의 648-385덤프의 VCE테스트프로그램과 MB6-871덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 850-001시험에 대비한 고품질 덤프와 ADR-001시험 최신버전덤프를 제공해드립니다. 최고품질 1Y0-300시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기