ITExamDump Business-Objects인증RDCR08201시험덤프 구매전 구매사이트에서 무료샘플을 다운받아 PDF버전 덤프내용을 우선 체험해보실수 있습니다. 무료샘플을 보시면ITExamDump Business-Objects인증RDCR08201시험대비자료에 믿음이 갈것입니다.고객님의 이익을 보장해드리기 위하여ITExamDump는 시험불합격시 덤프비용전액환불을 무조건 약속합니다. ITExamDump의 도움으로 더욱 많은 분들이 멋진 IT전문가로 거듭나기를 바라는바입니다.
ITExamDump의 Business-Objects인증 RDCR08201덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Business-Objects인증 RDCR08201덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Business-Objects인증 RDCR08201덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
수많은Business-Objects인증 RDCR08201시험공부자료중에서ITExamDump의Business-Objects인증 RDCR08201덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Business-Objects인증 RDCR08201덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Business-Objects인증 RDCR08201덤프가 있으면 힘든Business-Objects인증 RDCR08201시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Business-Objects인증 RDCR08201덤프로 시험준비 공부를 하는것입니다.
ITExamDump의Business-Objects인증RDCR08201자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Business-Objects인증RDCR08201시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
우리ITExamDump 사이트에서Business-Objects RDCR08201관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Business-Objects RDCR08201시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Business-Objects RDCR08201시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
ITExamDump는RDCR08201시험문제가 변경되면RDCR08201덤프업데이트를 시도합니다. 업데이트가능하면 바로 업데이트하여 업데이트된 최신버전을 무료로 제공해드리는데 시간은 1년동안입니다. RDCR08201시험을 패스하여 자격증을 취득하고 싶은 분들은ITExamDump제품을 추천해드립니다.온라인서비스를 찾아주시면 할인해드릴게요.
시험 번호/코드: RDCR08201
시험 이름: Business-Objects (Business Objects Certified Professional - Crystal Reports 2008 - Level One)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 170 문항
업데이트: 2013-12-18
RDCR08201 덤프무료샘플다운로드하기: http://www.itexamdump.com/RDCR08201.html
NO.1 You are creating a Crystal report to show just the Top N countries in an international sales report based
on total sales for the previous quarter. The value of N is dynamic. Which method must you use to achieve
the required result?
A.Using the Group Select Expert, create a parameter to set the value of N. Add a conditional formula to
view just the Top N countries.
B.After creating a parameter to set the value of N, reference that parameter within the Group Sort Expert.
Refresh the report setting the value of N in the parameter to show just the Top N countries.
C.Using the Group Sort Expert, create a parameter to set the value of N. Refresh the report setting the
value of N in the parameter to show just the Top N countries.
D.After creating a parameter to set the value of N, refresh the report to view just those countries with a
grand total that is greater than N.
Answer:B
Business-Objects RDCR08201기출문제 RDCR08201
NO.2 You make changes to the record selection criteria in a Crystal report. In which two circumstances
should you choose the Refresh Data option rather than the Use Saved Data option? (Choose two.)
A.When up-to-the-minute, current information must be displayed on the report.
B.When adding one or more selection criteria.
C.When it is important to avoid time delays caused by network traffic during database server connects.
D.When removing one or more existing selection criteria.
Answer:A D
Business-Objects기출문제 RDCR08201 RDCR08201 pdf RDCR08201 RDCR08201
NO.3 In Crystal Reports you select multiple report objects at the same time. Which two menu options become
available when you right-click one of the selected objects? (Choose two.)
A.Move
B.Insert
C.Delete
D.Copy
E.Cut
Answer:D E
Business-Objects인증 RDCR08201시험문제 RDCR08201 RDCR08201 RDCR08201인증 RDCR08201 pdf
NO.4 What two configuration options are valid for long Lists of Values (LOV) in Crystal Reports 2008?
(Choose two.)
A.UI Batch Size
B.Database Timeout
C.Maximum LOV Size
D.Maximum Rowset Records
Answer:A C
Business-Objects RDCR08201 RDCR08201 dump RDCR08201
NO.5 What are three Crystal Reports 2008 viewer features? (Choose three.)
A.Docked/Stationary Toolbar
B.Export to Microsoft PowerPoint
C.Java DHTML Viewer Exporting
D.Independent Group Tree Scrolling
Answer:A C D
Business-Objects자격증 RDCR08201 RDCR08201
NO.6 Which two statements describe how optional prompts behave in Crystal Reports 2008? (Choose two.)
A.If no value is entered in the prompt, all values are returned.
B.If no value is entered in the prompt, no values are returned.
C.If the parent prompt is optional, the child prompt must be optional.
D.If the child prompt is optional, the parent prompt must be optional.
Answer:A C
Business-Objects dump RDCR08201 RDCR08201 pdf RDCR08201
NO.7 Which two methods can you use to insert field objects into a Crystal report? (Choose two.)
A.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
B.Click the field name, drag it to the desired position and release the mouse button to insert.
C.Open the Section Expert and click the Insert button.
D.Click the field name and click the Insert to Report icon at the top of the Field Explorer. Drag the field to
the desired position and left-click to insert.
Answer:B D
Business-Objects RDCR08201 RDCR08201 RDCR08201기출문제
NO.8 Which three lines of code will generate an error? (Choose three.)
A.Local Number x := 1;
B.Local NumberVal x := 1;
C.Local NumberVar x := 1;
D.Local NumberValue x := 1;
Answer:A B D
Business-Objects기출문제 RDCR08201자격증 RDCR08201 RDCR08201시험문제 RDCR08201
NO.9 You want to see a list of formulas containing references to a specific field. Which method can you use?
A.Browse Field
B.Repository Explorer
C.Formula Field Search
D.Global Formula Search
Answer:D
Business-Objects자료 RDCR08201 RDCR08201 pdf RDCR08201 RDCR08201 RDCR08201
NO.10 Which two formulas can you use to determine whether the content of a string is a number? (Choose
two.)
A.IsNumber({Orders.Customer ID})
B.NumberText({Orders.Customer ID})
C.IsNumeric({Orders.Customer ID})
D.NumericText({Orders.Customer ID})
Answer:C D
Business-Objects덤프 RDCR08201 RDCR08201시험문제 RDCR08201 RDCR08201
NO.11 You copy a report from BusinessObjects Enterprise and modify the report. Which two methods can you
use to save changes back to BusinessObjects Enterprise? (Choose two.)
A.Save the report using the Report Explorer.
B.From the Main menu, select Save and choose Enterprise.
C.From the Main menu, select Save and choose Web Folders.
D.Save the report using the Repository Explorer.
Answer:B D
Business-Objects RDCR08201 dump RDCR08201
NO.12 You create a new Crystal report and want to add a Top N sort, but the Group Sort Expert is inactive.
How can you activate the Group Sort Expert?
A.Insert a group name field.
B.Insert a summary field.
C.Insert a running total field.
D.Insert a formula field.
Answer:B
Business-Objects자격증 RDCR08201 RDCR08201 dump RDCR08201 dump
NO.13 You must create a static array in a Crystal report to be used for numeric calculations in other formulas.
How can you do this?
A.Global NumberVar Array newArray := Array (1, 2, 3, 4, 5);
B.Global NumberVar Array newArray := MakeArray (1, 2, 3, 4, 5);
C.Global NumberVar Array newArray := CreateArray (1, 2, 3, 4, 5);
D.Global NumberVar Array newArray := DefineArray (1, 2, 3, 4, 5);
Answer:B
Business-Objects RDCR08201 RDCR08201자격증 RDCR08201시험문제 RDCR08201
NO.14 You want to create a formula using the Formula Workshop. You begin by right-clicking Formula Fields
in the Field Explorer and then click the New button. What happens after you click the New button?
A.You must select the type of formula and click OK.
B.The Formula Workshop opens with the Formula Editor inactive.
C.You must enter a formula name and click OK.
D.The Formula Workshop opens with the Formula Editor active.
Answer:C
Business-Objects덤프 RDCR08201덤프 RDCR08201기출문제
NO.15 Which two methods can you use to change the appearance of an object that you add to a Crystal report?
(Choose two.)
A.Hold down CTRL + Spacebar and click on the object.
B.Right-click the object and use the Format Editor.
C.Select the object and use the Formatting toolbar.
D.Drag-and-drop the object to the Formatting toolbar.
Answer:B C
Business-Objects dump RDCR08201 RDCR08201 RDCR08201시험문제 RDCR08201
NO.16 You are designing a Crystal report that summarizes customer orders by country, then by state, then by
city and by customer ID. You want the report to print each country on a new page. The first page should
display a bar chart showing Total Sales by Country group in the Report Header and as much of the first
country as can be displayed. The last page should show the summary for the last country and the grand
total for the entire report. Which step can you perform in the Section Expert to achieve the design goal?
A.Set New Page After on for Group Footer #1
B.Conditionally format the New Page After property for Group Footer #1 using the formula "not
onlastrecord"
C.Format the New Page After property for Group Header #1 using the formula "not onlastrecord"
D.Set New Page After on for the Report Header section
Answer:B
Business-Objects RDCR08201 RDCR08201시험문제 RDCR08201
NO.17 Which method can you use to insert field objects into a Crystal report?
A.Select the Field option from the Insert menu.
B.Right-click the area where you want the field object to appear, then select Insert Field Object from the
Context menu.
C.Click the field name, drag it to the desired position and release the mouse button to insert.
D.Click the Field button on the Formatting toolbar.
Answer:C
Business-Objects자격증 RDCR08201 RDCR08201자료 RDCR08201최신덤프 RDCR08201
NO.18 What is the reason you cannot insert a Group layout chart in the Page Header section?
A.You do not have access to the database.
B.The Page Header section is suppressed.
C.A Group layout chart cannot be placed in the Page Header section.
D.You have not saved the report with data.
Answer:C
Business-Objects RDCR08201시험문제 RDCR08201 RDCR08201
NO.19 Which three options are provided for web pagination? (Choose three.)
A.Navigation controls
B.Page breaking controls
C.Conditional Page Margin controls
D.Portrait versus Landscape controls
Answer:B C D
Business-Objects dumps RDCR08201 dump RDCR08201
NO.20 Which three If-Then-Else control structure formulas in Crystal syntax will generate an error? (Choose
three.)
A.If {Orders.Order Amount} < 100 Then "Under $100" Else Is {Orders.Order Amount} in 100 to 200 Then
"Between $100 and $200"
B.If {Orders.order Amount} < 1000 Then "Low" Else "High"
C.If {Orders.Order Amount} < 100 Then formula = "Under $100" ElseIf {Orders.Order Amount} in 100 to
200 Then formula = "Between $100 and $200" EndIf
D.If {Orders.Order Amount} < 200 Then Under $200 Else If {Orders.Order Amount} in 200 to 300 Then
Between $200 and $300
Answer:A C D
Business-Objects RDCR08201기출문제 RDCR08201 RDCR08201덤프 RDCR08201
NO.21 How must you register multiple XML export formats in Crystal Reports 2008?
A.Configure XML export formats using the Define XML dialog.
B.Configure XML export formats using the Manage XML dialog.
C.Add XML export formats using the Manage XML Exporting Formats dialog.
D.Add XML export formats using the Define XML Exporting Formats dialog.
Answer:C
Business-Objects RDCR08201 RDCR08201자격증 RDCR08201
NO.22 After you select a BusinessObjects Universe to use as the data source for a Crystal report, you create
a query using the BusinessObjects Query Panel. What must you do to access the underlying data source?
A.Create a local cache of the data source.
B.Create a connection to the data source.
C.Create a local ODBC resource for the data source.
D.Log in to BusinessObjects Enterprise.
Answer:D
Business-Objects시험문제 RDCR08201인증 RDCR08201 RDCR08201최신덤프
NO.23 Which special field can you use to display the date a report was last changed?
A.Modification Date
B.Modification LastDate
C.Modification LastUpdate
D.Modification Time
Answer:A
Business-Objects RDCR08201 RDCR08201
NO.24 You have created a report with a parameter but the parameter value is not always required. Which
method should you use?
A.Set Editable to True
B.Set Null Values to True
C.Set Custom Values to True
D.Set Optional Prompt to True
Answer:D
Business-Objects RDCR08201 RDCR08201 RDCR08201
NO.25 You want to use the Workbench feature to manage multiple reports and publish them to
BusinessObjects Enterprise as object packages. Your manager is concerned that any Crystal user could
access and make changes to the reports located on the Workbench. How can you address your
manager's concerns?
A.Encrypt object packages.
B.Password protect object packages.
C.Assign appropriate permissions to object packages that are published to BusinessObjects Enterprise.
D.Track changes on object packages using the Dependency Checker.
Answer:C
Business-Objects자료 RDCR08201최신덤프 RDCR08201덤프 RDCR08201 RDCR08201자격증
NO.26 When should you use parameters?
A.When creating conditional Top N reports.
B.When identifying the data source location.
C.When identifying trends in data.
D.When creating dynamic groups.
Answer:D
Business-Objects pdf RDCR08201덤프 RDCR08201
NO.27 Which two reasons explain why the Group Sort Expert is disabled when you attempt to create a Top N
report? (Choose two.)
A.You are in Design view.
B.The data was not refreshed.
C.You are in a Drill Down view.
D.The report is missing a summary value.
Answer:C D
Business-Objects덤프 RDCR08201 RDCR08201덤프 RDCR08201인증 RDCR08201시험문제
NO.28 You need a report that shows all customers and allows the report reader to view either a report listing all
days in the month to date or to view only the customers with daily sales greater than $5000. You decide to
use report alerts to accomplish this. Which formula properly sets the alert condition?
A.Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000
B.Sum ({Orders.Order Date}, {Orders.Order Amount}, "daily") > 5000}
C.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN crCondition = "Enabled"
D.IF Sum ({Orders.Order Amount}, {Orders.Order Date}, "daily") > 5000 THEN AlertMessage = "Enabled"
Answer:A
Business-Objects자격증 RDCR08201 RDCR08201덤프
NO.29 Which formula uses the correct syntax to assign a variable a value in Crystal syntax?
A.Numbervar x; x = 5;
B.Dim x as Number x = 5
C.Dim x as Number x := 5
D.Numbervar x; x := 5;
Answer:D
Business-Objects RDCR08201시험문제 RDCR08201 pdf RDCR08201 dump
NO.30 You design a Crystal summary report that is grouped by Region then by Customer Name. The Details
section is hidden. The report includes a bar chart that displays total orders by Customer Name for each
Region group. Which procedure will display the chart beside the sections that show Customer Name and
Total Sales?
A.Place the chart in the Group Header #1 section and format the section to Underlay Following Sections.
B.Place the chart in the Details section and format the section to suppress if duplicated.
C.Place the chart in the Group Footer #2 section and format the section to Underlay Following Sections.
D.Place the chart in the Group Footer #2 section and format the section to suppress if duplicated.
Answer:A
Business-Objects덤프 RDCR08201 RDCR08201시험문제 RDCR08201 RDCR08201
ITexamdump의 70-461덤프의 VCE테스트프로그램과 HP2-N37덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 LOT-404시험에 대비한 고품질 덤프와 JN0-380시험 최신버전덤프를 제공해드립니다. 최고품질 200-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기