ITExamDump를 선택함으로 여러분은 IBM 인증000-419시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 IBM 인증000-419시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는IBM 인증000-419덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며IBM 인증000-419시험을 한번에 패스하도록 도와드립니다.
IBM인증 000-419시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. IBM인증 000-419시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의IBM인증 000-419덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의IBM인증 000-419덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.
IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 IBM인증 000-419덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제IBM인증 000-419시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.
시험 번호/코드: 000-419
시험 이름: IBM (IBM InfoSphere Quality Stage v8 Examination)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 118 문항
업데이트: 2013-10-22
목표가 있다면 목표를 향해 끊임없이 달려야 멋진 인생이 됩니다. 지금의 현황에 만족하여 아무런 노력도 하지 않는다면 언젠가는 치열한 경쟁을 이겨내지 못하게 될것입니다. IT업종에 종사중이시라면 다른분들이 모두 취득하는 자격증쯤은 마련해야 되지 않겠습니까? IBM인증 000-419시험은 요즘 가장 인기있는 자격증 시험의 한과목입니다. IT업계에서 살아남으려면ITExamDump에서IBM인증 000-419덤프를 마련하여 자격증에 도전하여 자기의 자리를 찾아보세요.
000-419 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-419.html
NO.1 You modified a rule set to correct a problem with address standardization. Subsequent job runs show
no changes in standardization. Which two techniques will troubleshoot the problem? (Choose two.)
A. Provision the rule set.
B. Use a reject file for the input sequential file.
C. Use a reject file for the output data set.
D. Use the Rules Analyzer to test the rules logic.
Answer: AD
IBM 000-419 000-419 000-419덤프
NO.2 Click the Exhibit button.
The exhibit displays an example of distribution of weights for matched and unmatched records.
To further separate the distributions and improve the distinction of matched and unmatched records,
which three statements are true? (Choose three.)
A. Add disagreement weight overrides which will decrease the match composite score.
B. Decrease the number of variables in the match to allow remaining match fields to have more
discriminating power.
C. Add more variables to the match to provide additional information in calculating the match composite
score.
D. Lower the clerical cutoff and increase the match cutoff.
E. Add agreement weight overrides which will increase the composite match score.
Answer: ACE
IBM 000-419최신덤프 000-419
NO.3 You are obtaining product data from a new parts vendor. In your processing design you are using the
Reference Match stage to ensure these new parts are valid. This stage can deliver up to six outputs as a
result of this match processing. What are three of these outputs? (Choose three.)
A. Data Duplicate
B. Data Filtered
C. Clerical
D. Sorted
E. Match
Answer: ACE
IBM dump 000-419 000-419 dumps 000-419
NO.4 Click the Exhibit button.
In the exhibit you created and ran an unduplication job that produces masters, duplicates, clericals, and
residuals. The resulting residuals appear to contain records that should have matched.
Which technique will help you find the problem?
A. Add a reject link to the Matched stage to capture records with invalid data.
B. Add a reject link to the Unduplicate stage to capture records with invalid data.
C. Insert a Peek stage between the Unduplicate and Residuals stage to audit records.
D. Examine the match statistics message for the job in Director and look for block overflow.
Answer: D
IBM자격증 000-419자료 000-419기출문제 000-419최신덤프
NO.5 For an Unduplicate Match, how does the Match stage determine the master record?
A. the record within a block with the most unhandled data
B. the record within a block with the most values populated
C. the record within a block that matched to itself with the highest weight
D. the record within a block that occurred last
Answer: C
IBM자격증 000-419기출문제 000-419 000-419 dumps 000-419
NO.6 You built and tested a match job. Now you want to move it to the production server. Which three
components should be moved to the production server? (Choose three.)
A. job
B. match passes
C. rule sets
D. match specifications
E. Match Designer evaluation database
Answer: ABD
IBM 000-419 000-419자료 000-419
NO.7 Given the survivorship rule shown below:
COLUMN3: (SIZEOF(TRIM c.COLUMN3) >= 5) AND (SIZEOF(TRIM c.COLUMN1) > 0)
How will this survivorship rule be interpreted?
A. COLUMN3 of the previous record should be retained if the column contains five or more characters
and COLUMN1 has any contents.
B. COLUMN3 of the previous record should not be retained if the column contains five or more characters
and COLUMN1 has any contents.
C. COLUMN3 of the current record should be retained if the column contains five or more characters and
COLUMN1 has any contents.
D. COLUMN3 of the current record should not be retained if the column contains five or more characters
and COLUMN1 has any contents.
Answer: C
IBM인증 000-419 pdf 000-419 000-419인증 000-419
NO.8 In a sample data set of 10,000,000 records, the Social Security number has 90 percent distinct values.
To ensure that the Social Security number does not over-discriminate based upon its rare occurrence,
which statement is true?
A. Change the u-probability on the match command screen from .01 to .0000001.
B. Set special variable handling "CRITICAL".
C. Set special variable handling "NOFREQ".
D. Do not use the Social Security number in a match command.
Answer: C
IBM덤프 000-419최신덤프 000-419 pdf 000-419시험문제 000-419 dump 000-419
NO.9 How does the Survive stage relate records to be survived?
A. by the target columns of each survive rule
B. by the group identification column
C. by the column to be analyzed for each rule
D. by the match type ID column
Answer: B
IBM 000-419자료 000-419최신덤프
NO.10 What is a result when you increase the match cut-off setting?
A. It minimizes the false positives.
B. It minimizes the false negatives.
C. It adds agreement weight.
D. It subtracts agreement weight.
Answer: A
IBM기출문제 000-419최신덤프 000-419인증 000-419최신덤프 000-419덤프
NO.11 What are the two Match Specification probabilities that can be configured? (Choose two.)
A. m probability
B. u probability
C. r probability
D. pi probability
Answer: AB
IBM 000-419 000-419 dump 000-419 pdf
NO.12 When running Word Investigation, producing a pattern report will help you do what?
A. Refine a standardization rule set.
B. Decide which fields to use for blocking fields.
C. Discover inconsistencies in data type representation.
D. Identify which patterns should survive.
Answer: A
IBM 000-419 000-419 000-419자격증 000-419 pdf
NO.13 Which two steps occur when executing a match? (Choose two.)
A. summing records
B. isolating a subset of records to process using blocking strategy
C. incrementing a group of records using hashing strategy
D. scoring records
Answer: BD
IBM최신덤프 000-419기출문제 000-419자료 000-419 pdf
NO.14 What are the values of a survived record's columns if no input records pass any of the survive rules?
A. blanks
B. values of the first record processed
C. values of the last record processed
D. values of the master record of the matched set
Answer: A
IBM dump 000-419 000-419덤프
NO.15 When multiple rules are specified for the same target in a Survive stage, how is precedence
determined?
A. The first rule to evaluate as true has priority.
B. The rules appearing later in the list have precedence.
C. The value in the rule priority option determines the precedence.
D. The master record of the match set has priority.
Answer: B
IBM 000-419 dump 000-419인증 000-419 pdf
NO.16 A survive rule requires which two components? (Choose two.)
A. master record
B. column to analyze
C. match type
D. technique to apply
Answer: BD
IBM자료 000-419덤프 000-419인증 000-419 dump
NO.17 Some records in the Name column may contain a valid data value such as "Jane Doe" and some
records contain a NULL. The Name column is not used as a blocking variable. Which action can be
performed in the match specification to penalize records for containing a NULL in the name column?
A. Increase the Match Cut-off setting.
B. Change the Data Source Missing Weight.
C. Add a Weight Override for disagreement weight.
D. Change the Weight Override Conditional Data setting.
Answer: B
IBM dumps 000-419기출문제 000-419 000-419자료 000-419 pdf
NO.18 Which two statements are true about QualityStage survivorship? (Choose two.)
A. A rule can have only one target and a TRUE condition expression.
B. The input record requires a group identifier.
C. All input records must be combined into one input link.
D. A Survive job requires that you link a single input stage with multiple output stages.
E. The output file definition is the same as the input file definition.
Answer: BC
IBM 000-419자료 000-419 000-419 000-419
NO.19 When testing a reference match specification, which two statements accurately describe what should
be performed? (Choose two.)
A. Match frequencies must be generated to have no overlap.
B. Match frequencies must be generated for the source file.
C. Match frequencies must be generated for the reference file.
D. Match frequencies must be generated to have some overlap.
Answer: BC
IBM 000-419 000-419 dumps 000-419
NO.20 Click the Exhibit button.
Examine the statistics shown in the exhibit.
How many candidate groupings were processed for the data in Match Pass - CUSTOMER_ZIP3?
A. 4
B. 19
C. 14
D. 23
Answer: C
IBM시험문제 000-419 000-419 dumps 000-419 000-419최신덤프 000-419자격증
ITexamdump의 ICBB덤프의 VCE테스트프로그램과 LOT-404덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TERP10_65시험에 대비한 고품질 덤프와 1Z0-027시험 최신버전덤프를 제공해드립니다. 최고품질 70-484시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기