ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한Oracle인증1Z0-225시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리Oracle인증1Z0-225덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.
Oracle인증 1Z0-225시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Oracle인증 1Z0-225시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Oracle인증 1Z0-225덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Oracle인증 1Z0-225덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
ITExamDump는ITExamDump의Oracle인증 1Z0-225덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Oracle인증 1Z0-225덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.
최근 더욱 많은 분들이Oracle인증1Z0-225시험에 도전해보려고 합니다. ITExamDump에서는 여러분들의 시간돠 돈을 절약해드리기 위하여 저렴한 가격에 최고의 품질을 지닌 퍼펙트한Oracle인증1Z0-225시험덤플르 제공해드려 고객님의 시험준비에 편안함을 선물해드립니다. ITExamDump제품을 한번 믿어보세요.
이 글을 보시게 된다면Oracle인증 1Z0-225시험패스를 꿈꾸고 있는 분이라고 믿습니다. Oracle인증 1Z0-225시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의Oracle인증 1Z0-225덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의Oracle인증 1Z0-225덤프는 고객님께서 Oracle인증 1Z0-225시험을 패스하는 필수품입니다.
시험 번호/코드: 1Z0-225
시험 이름: Oracle (Oracle EBS R12: Inventory and Purchasing Fundamentals)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 192 문항
업데이트: 2013-10-21
1Z0-225 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-225.html
NO.1 Select three statements that are true about the receiving process. (Choose threE. )
A. You can correct receiving transaction errors.
B. You can record returns to suppliers and customers.
C. You can record receipt of unordered items, research receipt, and match the delivery to a purchase
order.
D. You can use express receipt to distribute a given quantity of an item from a single supplier across
multiple shipments and distributions.
E. You can define receiving tolerances and rules at the organization, supplier, item and order level, with
the highest level overriding the next levels (highest level being the organization).
Answer: ABC
Oracle 1Z0-225 pdf 1Z0-225 1Z0-225덤프 1Z0-225 dump
NO.2 ACME is implementing Inventory in a make-to-order manufacturing environment, where there is
on-hand inventory for 200 different motors.
For these purchasable items, given the proper profile setup, Min-max can automatically create _____.
A. an expense account
B. an encumbrance account
C. an invoice price variance account
D. an inventory Accounts Payable accrual account
E. records in the Purchase Order Requisition interface table
Answer: E
Oracle 1Z0-225 1Z0-225자격증 1Z0-225 1Z0-225 1Z0-225자격증
NO.3 An item has its Lot Control attribute set to Full Control.
The Active material status does not have any transaction types related to lot control enabled for material
status control. This status is assigned to all lot numbers associated with the item.
The subinventory where the item's lot numbers are all located also has the Active material status.
How will the application respond when a user tries to submit a subinventory transfer transaction?
A. The transaction will be accepteD.
B. An error message will be generateD.
C. The transaction will be accepted, but will be registered as a transfer to and from the same
subinventory.
D. The transaction will be accepted, but the item cost update will have to be processed separately by the
user.
Answer: A
Oracle인증 1Z0-225 1Z0-225덤프 1Z0-225
NO.4 XYZ is a metal fabrication company. It wants to classify all metals and plastics into two major groups.
There are many subgroups in metals and plastics. All the subgroups are linked to their major group.
This group classification is extensively used in all the reports in the organization.
Which Oracle functionality can meet the above requirement?
A. Catalogs
B. Categories
C. Catalog and Categories
D. Category Set and Categories
E. Group key flexfield enabled in the reports
F. Group descriptive flexfield enabled in the reports
Answer: D
Oracle 1Z0-225 1Z0-225
NO.5 During the requirements-gathering stage, your client states that it wants items purchased from a
supplier to be inspecteD. The client wants to know at what point the inventory is available to reservE.
When can reservations occur?
A. upon PO Line receipt
B. when the PO is approved
C. after the Inspection step is performed
D. after the Receipt Line Deliver transaction
E. reservations are not possible on inspection items
Answer: D
Oracle 1Z0-225 1Z0-225최신덤프 1Z0-225시험문제 1Z0-225
NO.6 ACME is implementing Inventory in a Process Manufacturing environment. The default profile for the
Min-Max Planning Report is deployeD.
What will be the result?
A. Requisitions will be preapproveD.
B. Users must approve requisitions for items that have a limited shelf lifE.
C. Users must approve requisitions for items with a Material Safety Data Sheet (MSDS).
D. Users must approve requisitions that are inside the items Past Due Supply time fencE.
E. Users must approve requisitions when the quantity exceeds the item's Economic Order Quantity
(EOQ).
Answer: A
Oracle 1Z0-225최신덤프 1Z0-225자격증 1Z0-225
NO.7 You and your client determined that forecasting methods included with inventory will be sufficient to
meet the client's needs.
You and the customer have decided to use Focus Forecasting to begin with and move to Exponential
Smoothing after one year.
Along the way, your customer noticed some definite trends in demand and has requested your help to
re-evaluate the forecasting methoD.
What do you recommend as a forecasting method? What additional information is needed, if any?
A. Focus Forecasting
B. Exponential Smoothing
C. Exponential Smoothing with Trend Enhanced Forecasting, Alpha and Beta Coefficients
D. Exponential Smoothing with Season Enhanced Forecasting, Alpha and Beta Coefficients
E. Exponential Smoothing with Season Enhanced Forecasting, Alpha and Gamma Coefficients
Answer: C
Oracle 1Z0-225덤프 1Z0-225 1Z0-225덤프 1Z0-225
NO.8 What is true about (alpha) in the Exponential Smoothing Forecast (ESF) method?
A. (alpha) equals the old forecast.
B. (alpha) is always greater than onE.
C. (alpha) is calculated by Oracle Inventory.
D. (alpha) is multiplied by the forecast error to determine the adjustment.
E. (alpha) equals the old forecast plus a portion of the forecast error from the previous perioD.
Answer: D
Oracle 1Z0-225 dump 1Z0-225 1Z0-225 1Z0-225시험문제
NO.9 Which three statements are true about the Move Order process? (Choose threE. )
A. Requisition and pick release orders are preapproveD.
B. Replenishment and pick wave move orders are preapproveD.
C. Requisition and pick release orders are preapproved and require inspection.
D. If no planner is specified for the item, the requisition line is automatically approveD.
E. If no approvals are required in your organization, set the inventory organization parameters Timeout
Period to 0 and the Timeout Action to Approve Automatically.
Answer: BDE
Oracle dump 1Z0-225 1Z0-225
NO.10 Your client wants the ability to perform the following tasks:
1.Allow requestors to self-approve purchasing requisitions if their approval levels are appropriatE.
2)Allow an approver to modify a purchasing requisition if necessary.
3)Allow requestors to forward their purchasing requisitions to different people if necessary.
4)Withdraw the ability to change the default "Forward From" on the purchasing requisition when
approving the samE.
5)Allow the purchasing requisition to follow the entire approval hierarchy until it reaches a person who can
approve the document regardless of authority.
6)Allow everyone to view each others' purchasing requisitions.
Which seven actions would satisfy the client's requirements? (Choose seven.)
A. Set the Access Level for the Purchasing Requisition document type to Full.
B. Set the Security Level for the Purchasing Requisition document type to PubliC.
C. Set the Security Level for the Purchasing Requisition document type to PrivatE.
D. Set the Forward Method for the Purchasing Requisition document type to Direct.
E. Select the Owner Can Approve box for the Purchasing Requisition Document TypE.
F. Set the Forward Method for the Purchasing Requisition document type to Hierarchy.
G. Deselect the Owner Can Approve box for the Purchasing Requisition document typE.
H. Select the Approver Can Modify check box for the Purchasing Requisition document typE.
I. Deselect the Approver Can Modify check box for the Purchasing Requisition document typE.
J. Select the Owner Can Forward-To check box for the Purchasing Requisition document typE.
K. Deselect the Can Change the Forward-From box for the Purchasing Requisition document typE.
Answer: ABEFHJK
Oracle 1Z0-225자격증 1Z0-225 pdf
NO.11 You want Oracle Inventory to automatically create move orders while performing min-max planninG. To
enable that functionality, you would need to define the ____.
A. subinventory supply source type at the pull level
B. Move Order Timeout Action to a value greater than zero
C. Move Order Timeout Period to a value greater than zero
D. subinventory supply source type at the subinventory or item level
Answer: D
Oracle dump 1Z0-225 1Z0-225인증 1Z0-225기출문제 1Z0-225자료 1Z0-225최신덤프
NO.12 Your client wants to ensure that backflush operations can continue even if the inventory level is driven
below zero. At the same time, they want typical inventory transactions to be prevented from driving
inventory levels below zero.
Which configuration meets this requirement?
A. Org Profile option to Allow Negative Balances = No; Profile option for INV: Override Neg for Backflush
= No.
B. Org Profile option to Allow Negative Balances = No; Profile option for INV: Override Neg for Backflush
= Yes.
C. Org Profile option to Allow Negative Balances = Yes; Profile option for INV: Override Neg for Backflush
= No.
D. Org Profile option to Allow Negative Balances = Yes; Profile option for INV: Override Neg for Backflush
= Yes.
Answer: B
Oracle 1Z0-225자격증 1Z0-225시험문제 1Z0-225자료 1Z0-225 1Z0-225
NO.13 The client wants to implement reorder point planning for some items in the organization. They
currently use min-max planninG. What is the minimum amount of information that needs to be changed
on the items the client wants to plan?
A. Safety Stock Quantity and Forecast
B. Safety Stock Quantity, Inventory Planning Method set to Reorder Point, Forecast Quantity, Carrying
Cost
C. Safety Stock Quantity, Inventory Planning Method set to Reorder Point, Forecast Quantity, Carrying
Cost, and Order Cost
D. Safety Stock Quantity, Inventory Planning Method set to Reorder Point, Forecast Quantity, Carrying
Cost, Order Cost, and Maximum Order Quantity
E. Safety Stock Quantity, Inventory Planning Method set to Reorder Point, Forecast Quantity, Carrying
Cost, Order Cost, and Minimum Order Quantity
Answer: C
Oracle dump 1Z0-225인증 1Z0-225 1Z0-225 dump
NO.14 Select three statements that are true regarding the clearing account. (Choose threE. )
A. An asset clearing account can also be used as a project clearing account.
B. You can have a maximum of one asset clearing account per asset category.
C. For each payables document you create, you can have a separate cash clearing account.
D. You can use Cash in Transit report in cash management only if cash clearing account and cash
account are separatE.
E. You use a separate cash clearing account and cash account to have visibility of the Cash in Transit on
the balance sheet.
Answer: BCE
Oracle인증 1Z0-225 1Z0-225최신덤프 1Z0-225 1Z0-225시험문제
NO.15 When a quotation is due to expire within the number of days you specified, then you receive the
following message in the Notifications Summary window: Quotations active or approaching expiration:
[number].
Where is this [number] set up in the system?
A. in the Quote Header - Warning Delay field
B. in the Systems Profile Options - PO: Quote Warning Delay
C. in Purchasing Options on the Default Tab - Quote Warning Delay field
D. Lookup Code, which is an (LOV) List of Values, in the Quote Header - Warning Delay field
Answer: C
Oracle 1Z0-225기출문제 1Z0-225 1Z0-225 1Z0-225
NO.16 What is the purpose of the profile options INV: CCEOI Commit Point and INV: CCEOI Workers?
A. to provide a baseline for generating cycle count tags
B. to set default values for the frequency of automatic cycle count requests
C. to set default values for the Import Cycle Count Entries from Open Interface concurrent program
D. to limit the actions permitted when reviewing cycle counts imported from an external system using the
Cycle Count Entries Open Interface
Answer: C
Oracle 1Z0-225 1Z0-225 1Z0-225덤프 1Z0-225
NO.17 Identify four mandatory implementation actions for approved supplier lists and sourcing rules.
(Choose four.)
A. Register suppliers.
B. Define buyer security.
C. Set the enterprise namE.
D. Define system profile options.
E. Assign Sourcing responsibilities.
F. Define purchasing Document Styles.
G. Set up attribute groups and requirements sections.
Answer: ACDE
Oracle자료 1Z0-225 dump 1Z0-225 pdf
NO.18 Identify the correct sequence of steps in the purchase order period close business flow.
A. 1. Review the Uninvoiced Receipts report. > 2. Process period-end accruals. > 3. Close the purchasing
perioD.
> 4. Process remaining inventory transactions and close the inventory accounting perioD. > 5. Run the
Accrual
Rebuild Reconciliation report. > 6. Write off accrued transactions as necessary. > 7. Create a manual
journal entry
for write-offs.
B. 1. Review the Uninvoiced Receipts report. > 2. Process period-end accruals. > 3. Close the purchasing
perioD.
> 4. Run the Accrual Rebuild Reconciliation report. > 5. Write off accrued transactions as necessary. > 6.
Create a
manual journal entry for write-offs. > 7. Process remaining inventory transactions and close the inventory
accounting perioD.
C. 1. Process remaining inventory transactions and close the inventory accounting perioD. > 2. Run the
Accrual
Rebuild Reconciliation report. > 3. Write-off accrued transactions as necessary. > 4. Create a manual
journal entry
for write-offs. > 5. Review the Uninvoiced Receipts report. > 6. Process period-end accruals. > 7. Close
the purchasing perioD.
D. 1. Process remaining inventory transactions and close the inventory accounting perioD. > 2. Review
the Uninvoiced Receipts report. > 3. Process period-end accruals. > 4. Close the purchasing perioD. > 5.
Run the Accrual Rebuild Reconciliation report. > 6. Write-off accrued transactions as necessary. > 7.
Create a manual journal entry for write-offs.
Answer: A
Oracle dumps 1Z0-225시험문제 1Z0-225 1Z0-225 1Z0-225인증
NO.19 Your client requires Org A to supply Org B with inventory on a need basis. The Internal Order flag is
checkeD.
An internal requisition has been created and approveD.
What type of receipt would Org B have to perform to receive the goods?
A. RMA receipt
B. Inter-Org Transfer
C. Account Alias receipt
D. Purchase Order receipt
E. Receipt by Shipment Number
Answer: E
Oracle 1Z0-225덤프 1Z0-225
NO.20 Which are the three mandatory fields when defining a supplier bank header? (Choose threE. )
A. Bank
B. Bank branch
C. Bank contact
D. Bank account number
E. Bank operating account
Answer: ABD
Oracle자료 1Z0-225시험문제 1Z0-225자료 1Z0-225
NO.21 While implementing a procurement solution for BAC Corp., you noted the following business
requirements:
a) Do not require purchase order approval if the unit price is increased or decreased by less than 15
percent.
b) Add comments in the Approve Purchase Order Reminder notification.
c) Change the number of days for the Approve Requisition Reminder notification.
Which two workflows need to be modified to meet these requirements? (Choose two.)
A. PO Change Order Workflow
B. PO Requisition Approval Workflow
C. Purchase Order Approval Workflow
D. Create Purchase Order or Releases Workflow
E. PO Send Notifications for Purchasing Documents Workflow
Answer: BD
Oracle 1Z0-225 1Z0-225 pdf 1Z0-225
NO.22 Oracle Inventory interacts with other Oracle applications by sharing information.
Which two pieces of information does Oracle Inventory receive from the Order Management application?
(Choose two.)
A. UOM information
B. shipping information
C. on-hand information
D. ATP supply information
E. reservations information
Answer: BE
Oracle dumps 1Z0-225인증 1Z0-225시험문제 1Z0-225자료
NO.23 Which data is received by Oracle Bill of Materials from Oracle Inventory?
A. ATP supply only
B. item information only
C. on-hand quantity only
D. item information and units of measure
E. units of measure and on-hand quantity
Answer: D
Oracle pdf 1Z0-225 1Z0-225최신덤프
NO.24 Your customer decided to use min-max planning for some items in specific subinventories. You
caution him not to include too many customer orders when he runs the report.
What option do you suggest that he include?
A. Supply Cutoff Date
B. Demand Cutoff Date
C. Supply and Demand Cutoff Dates
D. Material Requirement Planning (MRP)
E. Advanced Supply Chain Planning (ASCP)
Answer: B
Oracle 1Z0-225기출문제 1Z0-225 1Z0-225자료
NO.25 Min-max planning can be used _____.
A. only at the subinventory level
B. in place of MRP/MPS planning
C. in Exponential Smoothing Forecast calculations
D. in Economic Order Quantity(EOQ) calculations
E. in Material Requirement Planning/Master Production Schedule (MRP/MPS) calculations
Answer: B
Oracle 1Z0-225 1Z0-225기출문제
NO.26 Your client has an item that is used globally. The site in Colorado is evaluating a local source for the
item. The
buyer requires the incoming goods from the local source to be separated from the goods received from
nonlocal sources.
Which three actions should be performed to meet this requirement? (Choose threE. )
A. Enter the item in the subinventory form.
B. Modify master item attributes to default a subinventory.
C. Change the PO Line receipt routing to Inspection RequireD.
D. Modify organization item attributes to default a subinventory.
E. Create a separate subinventory to stock goods from the local sourcE.
F. Create item transaction default for the item in the Item Master Organization.
G. Insert a separate subinventory on the purchase order and attach Receiver Notes.
H. Ensure that you do not create an item transaction default for the item in the Inventory Organization.
Answer: EGH
Oracle pdf 1Z0-225 1Z0-225 1Z0-225인증
NO.27 You define a UOM Class for VolumE.
Which grouping represents the Volume class?
A. Liter, gallon, milliliter, pint
B. Kilometer, meter, mile, yard
C. Liter, milliliter, kilometer, meter
D. Liter, gallon, milliliter, centimeter
E. Kilometer, meter, cubic yard, cubic meter
F. Kilometer, meter, centimeter, cubic centimeter
Answer: A
Oracle자격증 1Z0-225 dumps 1Z0-225 1Z0-225기출문제
NO.28 Which two are supply sources for Supplier and Production inventory replenishment? (Choose two.)
A. Discrete job
B. Intransit order
C. External sales order
D. Replenishment move order
E. Internal purchase requisition
F. External purchase requisition
Answer: AF
Oracle 1Z0-225 dump 1Z0-225자격증 1Z0-225
NO.29 ABC company uses serial numbers for the following transactions:
1. Purchase order receipt
2. Miscellaneous receipt
3. Account alias receipt
The company wants to reuse the same serial numbers for work order completion transactions. Which
setup would allow it to reuse the same serial numbers?
A. INV: Validate Returned Serial: No
B. INV: Validate Returned Serial: Yes
C. INV: Restrict Receipt of Serials: No
D. INV: Restrict Receipt of Serials: Yes
E. INV: Validate Returned Lot: Yes and INV: Validate Returned Serial: No
F. INV: Restrict Receipt of Serials: Yes and INV: Validate Returned Serial: No
G. INV: Restrict Receipt of Serials: Yes and INV: Validate Returned Serial: Yes
Answer: C
Oracle기출문제 1Z0-225기출문제 1Z0-225 1Z0-225
NO.30 Which three statements regarding inventory forecasting are true? (Choose threE. )
A. Focus forecasting can only be generated from historical datA.
B. Focus forecasting is typically used to produce single period forecasts.
C. Statistical forecasting can be generated from either historical data or master schedule entries.
D. Statistical forecasting enables you to apply exponentially weighted trend and seasonality factors to
predict demanD.
E. Statistical forecasting enables you to simulate various methods of calculating demand so that you can
select the best forecasting model.
Answer: ABD
Oracle 1Z0-225 pdf 1Z0-225최신덤프 1Z0-225 1Z0-225 1Z0-225
ITexamdump의 LOT-951덤프의 VCE테스트프로그램과 000-783덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HH0-240시험에 대비한 고품질 덤프와 000-593시험 최신버전덤프를 제공해드립니다. 최고품질 000-122시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기