70-649 덤프 Microsoft 인증 시험

ITExamDump의 Microsoft인증 70-649덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Microsoft인증 70-649덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Microsoft인증 70-649로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.

IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Microsoft인증 70-649덤프로Microsoft인증 70-649시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.

ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미Microsoft 70-649시험을 패스하였습니다. 우리 자료로 여러분은 충분히Microsoft 70-649를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이Microsoft 70-649인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.

ITExamDump는 여러분이 Microsoft인증70-649시험 패스와 추후사업에 모두 도움이 되겠습니다.ITExamDump제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. Microsoft인증70-649 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이Microsoft인증70-649시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump Microsoft인증70-649인증시험자료는 100% 패스보장을 드립니다

시험 번호/코드: 70-649
시험 이름: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)

Microsoft 70-649인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.

ITExamDump의Microsoft인증 70-649덤프는 몇십년간 IT업계에 종사한 전문가들이Microsoft인증 70-649 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. Microsoft인증 70-649덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의Microsoft인증 70-649덤프는 Microsoft인증 70-649시험패스의 특효약입니다.

70-649 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-649.html

NO.1 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C

Microsoft최신덤프   70-649시험문제   70-649   70-649최신덤프   70-649

NO.2 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B

Microsoft시험문제   70-649   70-649 dump   70-649 pdf   70-649

NO.3 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D

Microsoft자료   70-649   70-649 pdf

NO.4 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B

Microsoft시험문제   70-649 pdf   70-649   70-649 dump

NO.5 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C

Microsoft   70-649덤프   70-649자료   70-649

NO.6 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A

Microsoft   70-649   70-649 dumps   70-649

NO.7 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C

Microsoft최신덤프   70-649   70-649최신덤프   70-649   70-649 dump   70-649

NO.8 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B

Microsoft dumps   70-649   70-649   70-649   70-649시험문제

NO.9 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D

Microsoft   70-649   70-649   70-649자격증

NO.10 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B

Microsoft dump   70-649   70-649

NO.11 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B

Microsoft pdf   70-649   70-649   70-649 dump

NO.12 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A

Microsoft pdf   70-649   70-649   70-649   70-649 pdf

NO.13 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC

Microsoft인증   70-649   70-649   70-649   70-649   70-649

NO.14 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B

Microsoft   70-649   70-649 pdf   70-649시험문제   70-649

NO.15 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C

Microsoft최신덤프   70-649자료   70-649 dump   70-649   70-649

NO.16 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B

Microsoft   70-649   70-649자료   70-649

NO.17 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C

Microsoft   70-649시험문제   70-649   70-649   70-649자격증

NO.18 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C

Microsoft   70-649기출문제   70-649자료   70-649인증

NO.19 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B

Microsoft기출문제   70-649   70-649최신덤프   70-649기출문제

NO.20 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C

Microsoft   70-649기출문제   70-649

IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Microsoft인증 70-649시험에 도전하는 분이 많은데 ITExamDump에서 Microsoft인증 70-649시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.