Oracle 인증 1Z0-108시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Oracle 인증 1Z0-108시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Oracle 인증 1Z0-108시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.
ITExamDump이 바로 아주 좋은Oracle 1Z0-108인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인Oracle 1Z0-108인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는Oracle 1Z0-108인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의Oracle 1Z0-108인증시험덤프는 ITExamDump전문적으로Oracle 1Z0-108인증시험대비로 만들어진 최고의 자료입니다.
시험 번호/코드: 1Z0-108
시험 이름: Oracle (Oracle WebLogic System Administration)
ITExamDump 의 Oracle인증 1Z0-108덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
인터넷에는Oracle인증 1Z0-108시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Oracle인증 1Z0-108공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Oracle인증 1Z0-108덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.
여러분이 다른 사이트에서도Oracle인증1Z0-108시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Oracle인증1Z0-108시험을 패스하실 수 있습니다.
Oracle 1Z0-108인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.Oracle 1Z0-108인증시험에 대한 열기는 식지 않습니다.Oracle 1Z0-108자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.
Oracle인증 1Z0-108시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. Oracle인증 1Z0-108시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의Oracle인증 1Z0-108는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. Oracle인증 1Z0-108덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.
1Z0-108 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-108.html
NO.1 The deployment configuration for an application or module is NOT stored in which type of the following
XML document:
A. J2EE deployment descriptors
B. weblogic-*.xml descriptors
C. WebLogic Server deployment plans
D. WebLogic config.xml
Answer: D
Oracle최신덤프 1Z0-108덤프 1Z0-108 1Z0-108 1Z0-108
NO.2 An application-wide deployment plan was used to deploy an application. Based on post-performance
diagnosis, the HTTP post size needs to be reduced. Following would be a valid approach:
A. Configure the http maximum post size value in the existing deployment plan for redeploying using the
weblogic.Deployer utility.
B. Update the http maximum post size for the application using weblogic.Deployer.
C. Use weblogic.PlanGenerator to update http maximum post size configuration and redeploy the
application.
D. Use weblogic.Admin to set auto-tune-http-setting to be true and redeploy the application.
Answer: A
Oracle 1Z0-108 1Z0-108기출문제
NO.3 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
If the admin server for New York cluster crashes, what will be the effect on inter-cluster communication
between the two sites?
A. There's no effect on the inter-cluster communication between the two sites
B. JDBC session flushing between two sites will be affected and will only be restarted on the Admin server
reboot.
C. Intra-cluster multicasting will be affected and inter-cluster communication will slow down between the
sites.
D. The Managed Servers will lose session stickiness and the server Health state will be changed to
suspend.
E. Both c and d
Answer: A
Oracle 1Z0-108 1Z0-108 1Z0-108 1Z0-108 1Z0-108자료
NO.4 Which of the following statements are true for built-in roles in the WebLogic Server Administration
console? Choose two.
A. Users who belong to the Operator role can deploy the applications.
B. Users who belong to the Monitor role can view the server configuration, except for the encrypted
attributes.
C. Users who belong to the Admin role cannot deploy applications.
D. Only users who belong to the Admin role can start, stop, and resume the server.
E. Users who belong to the Admin role can modify the entire server configuration.
Answer: BE
Oracle 1Z0-108인증 1Z0-108 1Z0-108
NO.5 Scenario : Consider an upgrade requirement from pre-WebLogic Server 10.x to the WebLogic Server
10.x. Since the administration scripts in the prior version used WebLogic Ant tasks for creation and
deployment, the team decides to use the Ant build.xml approach and extend this to the current version of
the server.
Which of the following about the Ant task wlserver is INCORRECT?
A. wlserver can be used to start, reboot or shut down server instances.
B. wlserver can be used to connect to existing server instances.
C. wlserver can be used to create a multiple server domain configuration.
D. wlserver can be used to create a single server domain and to connect to the server.
Answer: C
Oracle 1Z0-108 dumps 1Z0-108시험문제
NO.6 JMS interop modules are different from JMS system resource modules because (Choose two)
A. JMS interop modules cannot use "Unit-of-Order".
B. JMS interop modules can be targeted to multiple WebLogic Servers at the same time in a domain.
C. JMS interop module configuration is always stored as interop-jms.xml.
D. JMS interop module cannot use "Quota."
Answer: BC
Oracle 1Z0-108 dumps 1Z0-108 dump 1Z0-108
NO.7 Click on the Exhibit button.
Scenario : A multi-network cluster, say WAN-1 and WAN-2, is being created that will provide WAN HTTP
session failover. The WAN-1 cluster is located in London and the WAN-2 cluster is located in New York and
is connected via a slow interconnect. The client request passes through a Global load balancer which load
balances the request to local load balancers which eventually pass the load to WebLogic Server instances
in the cluster. Four WebLogic Server instances will be running on each cluster distributed on two physical
machines, two WebLogic instances per physical machine. A database is configured on each cluster for
HTTP Session state failover between the clusters.
How can you configure in-memory session replication on the London cluster?
A. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
memory.
B. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
replicated.
C. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
cookie.
D. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
memory.
E. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
replicated.
Answer: B
Oracle 1Z0-108 1Z0-108
NO.8 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What happens if all the servers hosted in the London cluster crashes in the middle of an http session
update?
A. The session will be regenerated on the New York cluster without any session data loss, and a new
primary server will be created using the secondary session data.
B. The session will be regenerated on the New York cluster but there could be a loss of session data; a new
primary server will be created using the last known secondary session data.
C. The session will not be regenerated on any cluster; the user will be redirected to the New York cluster to
create a new session.
D. The session will be regenerated if the primary server on the London cluster is restarted.
E. Both b and d
Answer: B
Oracle 1Z0-108기출문제 1Z0-108기출문제 1Z0-108시험문제
NO.9 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end Warehousing
Application. To distribute the messages across the cluster, you decided to configure the distributed
destination. Also the Warehousing Application is a legacy application written to implement a proprietary MQ
API connecting an MQ-Series server. The Stock Control Application is implemented as a web application on
a WebLogic cluster delivering the message to the distributed destination. The cluster has three Managed
Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the high-powered
and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A
Oracle 1Z0-108 1Z0-108기출문제 1Z0-108덤프
NO.10 Which of the following is true about JMS Quota resources in WebLogic Server 10.x?
A. Quota settings can be shared across multiple JMS destinations so that they can compete.
B. Quota settings are defined on the JMS connection factory level.
C. Quota settings can be used to limit the number of JMS Connections to a JMS Server.
D. Quota settings can be shared across multiple WebLogic domains.
Answer: A
Oracle 1Z0-108 1Z0-108자료 1Z0-108 1Z0-108인증 1Z0-108
NO.11 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What would be the characteristics of the above WAN Cluster for optimal performance and scalability?
A. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via in-memory, JDBC or file persistence.
B. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous replication
intra-cluster and cross-cluster replication via file persistence.
C. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via JDBC
D. Low network latency, asynchronous persistent replication between WAN-1 and WAN-2, no intra-cluster
replication and cross-cluster replication via JDBC
E. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous
intra-cluster replication and cross-cluster replication via cookie persistence.
Answer: C
Oracle자격증 1Z0-108최신덤프 1Z0-108 1Z0-108기출문제 1Z0-108
NO.12 When a message is being processed by a consumer, the other unprocessed messages which belong to
the same Unit-of-Order will be:
A. Expired
B. Blocked
C. Delivered to the consumers
D. Rolled back
Answer: B
Oracle최신덤프 1Z0-108 1Z0-108 dump 1Z0-108 1Z0-108기출문제
NO.13 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
10.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A
Oracle 1Z0-108 1Z0-108기출문제
NO.14 In a multi-server WebLogic domain, monitoring the JVM statistics showed frequent full garbage
collections (gc) on one of the server instances. Which one of the following would greatly reduce the
frequency of full gcs?
A. Increasing the young object space in the heap
B. Turning the -verbosegc flag on
C. Adding more servers to the domain
D. Running more servers per machine
Answer: A
Oracle 1Z0-108 dumps 1Z0-108 1Z0-108
NO.15 The feature to group messages into a single unit that is processed sequentially in the order that the
messages were created is called
A. Unit-or-Sort
B. Message Sorting
C. Destination Keys
D. Unit-of-Order
Answer: D
Oracle 1Z0-108 1Z0-108 1Z0-108인증 1Z0-108
NO.16 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
An EAR file is being deployed to the cluster using two-phase deployment. Which of the following is true if
one of the Managed Servers is NOT started in the cluster?
A. First and second phase deployment will be completed on all remaining instances in the cluster.
B. First phase deployment will not be completed on the remaining instances in the cluster.
C. First phase deployment will be completed but the second phase will not be completed on the remaining
instances in the cluster.
D. First and second phase deployment will not be completed if enforceClusterConstraints is set to true for
the Deployer.
E. Both a and d
Answer: E
Oracle 1Z0-108자료 1Z0-108
NO.17 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
A JSP in the web application makes an initial Context lookup on the stateless EJB and makes multiple
method calls to the EJB. Which of the following is true?
A. Each method call is invoked on an EJB on the same server as the web application as long as the server
is not overloaded.
B. Each method call is invoked on the same EJB in the same server as the web application as long as the
server is not overloaded.
C. Each method call round robins between the servers.
D. The behavior depends on the load algorithm on the replica-aware stub.
E. Every third call goes to a random server.
Answer: A
Oracle 1Z0-108자료 1Z0-108 dump
NO.18 Click on the Exhibit button.
Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration ?one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 10.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to upgrade
the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to configure
multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is via a JMS
message bridge. When a service engineer calls in with a report, a message is sent via JMS to the
Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is not
lost because the call management system is not able to resend messages. To address this, the Customer
Service application is accessing a persistent JMS Queue using an XA compatible connection factory.
The database security team insists that any use of the corporate Oracle database can be traced to the
individual user that made the request. How can this be achieved when using WebLogic JDBC Data
Sources?
A. Set the Enable Credential Mapping property for the Data Source.
B. Set Initial Capacity to zero, so each user creates a new connection.
C. Set the value of user to {WLS_USER} in the Properties field.
D. This can only be done using application code.
E. This cannot be done because Data Sources connect using a single username.
Answer: A
Oracle dump 1Z0-108자격증 1Z0-108최신덤프 1Z0-108인증 1Z0-108
NO.19 Requirement demands that an incoming request from a portfolio manager has to have a higher priority
compared to other users of the application. As an administrator, which one of the following approaches
would you adopt?
A. Use Work Manager with the execute thread model to set up rules to associate a priority to the user.
B. Use Work Manager fair-share-request-class to associate a priority to the user.
C. Use Work Manager response-time-request-class to associate a priority to the user.
D. Use Work Manager context-request-class to associate a priority to the user.
Answer: D
Oracle덤프 1Z0-108최신덤프 1Z0-108 1Z0-108자격증 1Z0-108
NO.20 Scenario : Consider a b2b commerce application hosted on a WebLogic cluster with JMS messages
being received, processed, and forwarded to external servers. The server log indicates a potential stuck
thread problem where threads are continually getting stuck and JMX monitoring indicates a continuous
backlog of pending messages that could be due to any of the in-flight messages, delayed messages, or
messages being inhibited from delivery.
The recommended approach for setting the number of execute threads would be:
A. Set the default thread pool max value to match load expectations
B. Use an iterative approach to set the max thread count value
C. Set this value the same as the max connections value set on database connections
D. Leave this setting to be handled by the Work Manager by configuring MaxThreadsConstraint
Answer: D
Oracle 1Z0-108시험문제 1Z0-108최신덤프
멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. Oracle인증 1Z0-108시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의Oracle인증 1Z0-108덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의Oracle인증 1Z0-108덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.
댓글 없음:
댓글 쓰기