도비 IBM LOT-914 시험

ITExamDump는IBM LOT-914인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의IBM LOT-914자료를 만들었습니다. 이 자료로 여러분은 100%IBM의LOT-914인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중IBM LOT-914인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.

많은 사이트에서도 무료IBM LOT-914덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한IBM LOT-914데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리ITExamDump에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다

ITExamDump는IBM LOT-914인증시험의 촉매제 같은 사이트입니다.IBM LOT-914인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이IBM LOT-914인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의IBM LOT-914덤프자료가 많은 도움이 될 것입니다.

ITExamDump의IBM인증 LOT-914덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의IBM인증 LOT-914덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? IBM인증 LOT-914덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

우선 우리ITExamDump 사이트에서IBM LOT-914관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는IBM LOT-914덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.

시험 번호/코드: LOT-914

시험 이름: IBM (Administering IBM Lotus Quickr 8.5 for Domino)

LOT-914 덤프무료샘플다운로드하기: http://www.itexamdump.com/LOT-914.html

NO.1 Louise has installed one Lotus Quickr server in her organization and she now wants to enable
cross-place searches. Which of the following tasks is NOT required when enabling Cross Places
Searches?
A. Set <search_places enabled="true" ....> in the qpconfig.xml
B. Enable SSO
C. Enable Domain Catalog in the Domino Server document that will be used as the Domain
catalog Server
D. Specify the Domain Catalog Server under <domain_catalog_server...> in the qpconfig.xml
Answer: B

IBM dumps   LOT-914인증   LOT-914최신덤프

NO.2 You would like to prevent a Place from receiving updates to the parent PlaceType. What should you do
to prevent the refresh?
A. Under Customize -Basics, clear the check mark next to Receive Updates
B. Change thePlaceType under Place Administration
C. Under Work with Templates, edit the PlaceType
D. Youcan not prevent a Place from refreshing from the parent PlaceType
Answer: A

IBM자료   LOT-914   LOT-914

NO.3 Oscar, the local administrator, has issued the following qptool command on his Lotus Quickr server:
load qptool placecatalog -reset Which of the following statistics are reset to zero (0) with this command?
A. LasyDayUses
B. DocReadCounts
C. NumberOfDocs
D. PlaceLastModified
Answer: B

IBM   LOT-914   LOT-914 dumps   LOT-914 dumps   LOT-914

NO.4 Each of the following statements is true about the Place Catalog in Quickr 8.5, EXCEPT?
A. Each server, place, and room has a separate entry in the Place Catalog
B. The Place Catalog contains Policy documents
C. It enables place members to use My Places to see a list of places they belong to and statistics about
those places
D. The Place Catalog contains the statistics of each place
Answer: D

IBM dump   LOT-914인증   LOT-914인증   LOT-914 dumps   LOT-914자료

NO.5 What access level do members need to have to use My Places to perform place administration tasks?
A. Reader Access
B. Editor Access
C. Manager Access
D. Author Access
Answer: C

IBM   LOT-914   LOT-914   LOT-914

NO.6 You must have which of the following accesses to a place to create, edit, copy, delete, or run PlaceBots
manually?
A. Author
B. Editor
C. Designer
D. Manager
Answer: D

IBM   LOT-914기출문제   LOT-914

NO.7 What is the proper way to use the qptool register command to register a single place and have it create
a mail-in document in a single Quickr server?
A. loadqptool register -p PlaceName
B. loadqptool register -a PlaceName
C. loadqptool register -p PlaceName -install
D. loadqptool register -p PlaceName -mail-in
Answer: C

IBM   LOT-914   LOT-914 dump   LOT-914덤프

NO.8 Several of the Places on your server have exceeded a predetermined size limit. How can you send a
broadcast email to the Place managers to ask them to reduce the size of their Places?
A. Using the Send Mail feature in Site Administration
B. Using the command: loadqptool mail -managers -template template.xsl -i mail.xml
C. Using the Send Mail feature in Place Administration
D. Using the command: loadqptool newsletter -a -managers -i mail.xml
Answer: C

IBM   LOT-914   LOT-914   LOT-914

NO.9 While placing the necessary files onto the Lotus Sametime server for Lotus Quickr integration, you must
manually create which of the following folders for the files?
A. awareness
B. usernames
C. integration
D. peopleonline
Answer: D

IBM   LOT-914   LOT-914자격증   LOT-914 dump

NO.10 Which one of the following commands should be used when upgrading a Quickr template?
A. loadqptool upgrade -pt PlaceType
B. loadqptool upgrade -p PlaceType
C. loadqptool upgrade -t template
D. loadqptool PlaceType upgrade -t
Answer: A

IBM자료   LOT-914   LOT-914자료   LOT-914   LOT-914인증

NO.11 When configuring Quickr to integrate with an ECM, which of the followings parameters must be set in
the qpconfig.xml?
A. <ecm_integration enabled="true">
B. <ecm enabled="true">
C. <quickr_ecm disable="false">
D. <quickr_integration ecm="true">
Answer: A

IBM   LOT-914자격증   LOT-914   LOT-914최신덤프   LOT-914덤프

NO.12 As a Quickr administrator, what would you do to find out the size of all places on the server?
A. Review the files sizes in the place directories indomino_data_root\LotusQuickr on the server
B. In the Notes client, open PlaceCatalog.nsf and open the Places and Rooms view
C. Run the command: loadqptool report -q [PlaceSize]>1000
D. From Places Administration, click on Statistics and then Download Statistics
Answer: D

IBM최신덤프   LOT-914 dump   LOT-914 dumps   LOT-914

NO.13 Barry, a QuickPlace Administrator, uses the QPtool remove command to remove a place. Which of the
following statements about removing places using the remove command is correct?
A. By default, the remove command removes places immediately
B. You must use the remove command on each user in the removed place also
C. You must configure theQPTool Remove field in the server document to determine when the place is
removed
D. If you use the remove command, you do not have to use the unregister command to remove the place
document
Answer: D

IBM덤프   LOT-914자료   LOT-914

NO.14 After configuring Web page cache settings within Lotus Quickr, if a Web page is cached, subsequent
requests for the page are served from the cached copy by the server. How are these cached copies
stored?
A. Per place
B. Server wide
C. Per user name
D. Per group name
Answer: C

IBM   LOT-914인증   LOT-914 dump   LOT-914자격증

NO.15 Which one of the following qpconfig.xml settings should be used in order to hide the Log In and Log Out
link from the Lotus Quickr homepage?
A. <authentication>
<sign_out enabled="false"/>
<sign_in enabled="false"/>
</authentication>
B. <authentication>
<sign_out hide="true"/>
<sign_in hide="true"/>
</authentication>
C. <security>
<sign_out enabled="false"/>
<sign_in enabled="false"/>
......
</security>
D. <security>
<sign_out disabled="true"/>
<sign_in disabled="true"/>
......
</security>
Answer: A

IBM   LOT-914   LOT-914

NO.16 During installation, you specified a Lotus Quickr Administrator. In which of the following locations is the
administrator stored by default?
A. In the local Lotus Domino Directory
B. As a local member of the server's Site Administration place
C. qpsecurity.xml
D. In both the local Lotus Domino Directory and the Site Administration place
Answer: B

IBM   LOT-914   LOT-914   LOT-914덤프

NO.17 You have created templates for places on your Lotus Quickr server. As an example, suppose you
create the place Sales and give it the look and feel you want to appear in places that members of the
Sales team create. You create a PlaceType from it called Sales PlaceType, and then you create the place
West Coast Sales from Sales PlaceType. Which of the following occurs if you change the design of Sales
and wish to distribute the design changes?
A. Refresh only Sales to distribute the changes
B. Refresh West Coast Sales to distribute the changes
C. Refresh SalesPlaceType and then West Coast Sales to distribute the changes
D. RefreshSales, refresh West Coast Sales, and then Sales PlaceType to distribute the changes
Answer: C

IBM최신덤프   LOT-914자격증   LOT-914

NO.18 Which of the following tasks is required when you have to change your LDAP connections to use SSL,
and Lotus Quickr is using Domino to control the Directory services?
A. Configure SSL in the Directory Assistance document
B. Configure SSL under <ldap> in the qpconfig.xml
C. Enable SSL in the Site Administration Page, under Directory services
D. Quickr does not support SSL connections to LDAP
Answer: A

IBM   LOT-914덤프   LOT-914최신덤프   LOT-914 pdf

NO.19 The Lotus Quickr environment you are viewing has a large number of places. Which of the following
options will decrease directory search times while in the Human Resources place on the Lotus Quickr
server?
A. Rebuild the LDAP cache in the place
B. Enable Narrow searches to the place name
C. Modify the LDAP port number to an alternate port
D. Enable check for SSL connection with LDAP user directory
Answer: B

IBM   LOT-914 dumps   LOT-914자격증   LOT-914덤프

NO.20 Using the report command, you can retrieve the following information from the Place Catalog about
places, EXCEPT?
A. Name and Title
B. Date last accessed and Date last modified
C. Members of the Place
D. Size of the Place
Answer: C

IBM   LOT-914   LOT-914 dump   LOT-914 dump   LOT-914 dump

IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는IBM인증 LOT-914인증시험에 대비한 고품질 덤프를 연구제작하였습니다. IBM인증 LOT-914시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.