IBM 자격증 000-103 시험문제와 답

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에IBM 000-103인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

IBM인증 000-103시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면IBM인증 000-103시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 IBM인증 000-103덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는IBM인증 000-103덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

ITExamDump는 유일하게 여러분이 원하는IBM인증000-103시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.

우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-103시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에IBM 000-103인증시험을 패스함을 보장 드립니다.

ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이IBM인증000-103시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이IBM인증000-103시험에 대한 부담은 사라질 것입니다.

지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해IBM 인증000-103시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.

시험 번호/코드: 000-103

시험 이름: IBM (AIX 6.1 Basic Operations)

000-103 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-103.html

NO.1 An operator is trying to perform an immediate power down of an AIX LPAR using the 'shutdown -k'
command. The cursor has returned to the command prompt, but no shutdown activities are showing on
the screen after more than one minute.
Which of the following is the most likely cause of the problem?
A. The /etc/rc.shutdown script is missing.
B. The bos.rte.control fileset has become corrupted.
C. The operator UID is not a member of the shutdown group.
D. The -k flag against the shutdown command only broadcast the shutdown message.
Answer: D

IBM dumps   000-103자격증   000-103인증

NO.2 During heavy system resources usage, and administrator detects that the top processes are from the
user 'webapp'. The operator needs to check all the running processes from that user to analyze them.
Which command can retrieve that information in a single step?
A. puser webapp
B. ps -fu webapp
C. proc -uid webapp
D. fuser /dev/webapp
Answer: B

IBM pdf   000-103 pdf   000-103기출문제   000-103   000-103 dump

NO.3 An operator needs to change from the /usr/bin to the /var/spool directory. Which of the following
commands will accomplish this?
A. cd /var/spool
B. lcd /var/spool
C. cd /usr/bin /var/spool
D. lcd /usr/bin /var/spool
Answer: A

IBM   000-103기출문제   000-103   000-103

NO.4 The operator is viewing a file using 'more'. What subcommand can be used to exit before reaching
the end of the file?
A. q
B. :w!
C. /quit
D. ctrl X
Answer: A

IBM   000-103   000-103

NO.5 An operator needs to replace all the occurrences of the string '/home/user1' in the current file using vi
with '/home1/user2'. Which of the following sub-commands will achieve this?
A. :1,$ s:/home/user1./home1/user2.g
B. :1,$ s\/home/user1\/home1/user2\/g
C. :1,$ s\/\/home\/user1\/\/home1\/user2\/g
D. :1,$ s/\\/home\\/user1/\\/home1\\/user2/g
Answer: A

IBM dump   000-103   000-103자료   000-103 dump

NO.6 Which command enables a user to exit the vi editor, overwriting the existing file without prompting for
confirmation?
A. :w
B. :qw
C. :x!
D. :we!
Answer: C

IBM시험문제   000-103자격증   000-103   000-103   000-103

NO.7 After performing a modification on the /etc/ssh/sshd_config file the operator needs to reinitialize the
secure shell daemon to enable the new settings. Which of the following is the correct way to achieve this?
A. Use refresh -s sshd
B. Use init.sshd /etc/rc.ssh
C. Use /usr/sbin/sshd -restart
D. Use stopsrc -s sshd and then startsrc -s sshd
Answer: D

IBM   000-103 pdf   000-103 dumps   000-103덤프

NO.8 An operator is in the middle of a file using 'more'. What subcommand can be used to go to previous
page in the file?
A. b
B. p
C. r
D. v
Answer: A

IBM dumps   000-103   000-103자격증   000-103자격증

NO.9 An operator has been asked if a system was rebooted. Which of the following commands should be
used to determine if a reboot has occurred?
A. The name?command.The ?name?command.
B. The ptime?command.The ?ptime?command.
C. The hutdown ast?command.The ?hutdown ?ast?command.
D. The ?etc/rc.shutdown?command.
Answer: B

IBM기출문제   000-103   000-103   000-103

NO.10 An operator needs to schedule the script '/usr/scripts/listall.ksh' to run at 19.00 on the current day. What
is the correct form of the 'at' command to accomplish this task?
A. at 7 /usr/scripts/listall.ksh
B. at 7 P /usr/scripts/listall.ksh
C. at now + 7 /usr/scripts/listall.ksh
D. at today + 7 p /usr/scripts/listall.ksh
Answer: B

IBM   000-103   000-103   000-103   000-103자료

NO.11 An operator needs to run a script which will write standard output and standard error to different files.
Which of the following commands will successfully perform this task?
A. myscript.ksh 1>/tmp/log/script.log 2>/tmp/log/script.err
B. myscript.ksh $1>/tmp/log/script.log $2>/tmp/log/script.err
C. myscript.ksh 1>/tmp/log/script.log 2>&1 /tmp/log/script/err
D. myscript.ksh 2>&1 /tmp/log/script.log 2> /tmp/log/script.err
Answer: A

IBM   000-103 dump   000-103 dumps

NO.12 Which of the following commands will display what space is used in /tmp filesystem?
A. df -Ik /tmp
B. df -fk /tmp
C. df -Uk /tmp
D. df -Fk /tmp
Answer: A

IBM   000-103   000-103   000-103   000-103

NO.13 A user is complaining that their display does not look correct. When the operator has the user run the
command 'echo $TERM' the result is 'ascii', however, the /etc/environment file contains the line 'export
TERM=vt100'. What is the likely cause of this difference?
A. The user is not using a VT100 terminal
B. The user's login shell is set to sh instead of ksh
C. The user's .profile resets the TERM environment variable
D. The /etc/profile file sets the TERM environment variable to 'ascii'
Answer: C

IBM pdf   000-103 pdf   000-103시험문제

NO.14 Which of the following will rename dir1 as dir2?
A. mv dir1 dir2
B. ren dir1 dir2
C. cp -R dir1 dir2
D. mv -R dir1 dir2
Answer: A

IBM기출문제   000-103   000-103   000-103   000-103

NO.15 The printer associated with the hp5_queue is down for maintenance.
Which of the following commands will move the remaining print jobs from hp5_queue to the hp7_queue?
A. export $LPDEST=hp7_queue
B. qmov -m hp7_queue -P hp5_queue
C. lpmov -s hp5_queue -d hp7_queue
D. redirect -q hp5_queue hp7_queue
Answer: B

IBM   000-103   000-103 dumps   000-103

ITExamDump에서 IBM인증 000-103덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. IBM인증 000-103덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.