2013년 7월 31일 수요일

HP HP0-Y26 덤프데모

모두 아시다시피HP HP0-Y26인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.HP HP0-Y26인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.


ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. HP 인증HP0-Y26덤프 무료샘플을 다운받아 체험해보세요.


취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. HP인증 HP0-Y26시험은 널리 인정받는 인기자격증의 시험과목입니다. HP인증 HP0-Y26시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의HP인증 HP0-Y26덤프는 시험패스율이 높아HP인증 HP0-Y26시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.


HP인증 HP0-Y26시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 HP인증 HP0-Y26시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의HP인증 HP0-Y26덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.


시험 번호/코드: HP0-Y26

시험 이름: HP (Building a Complete HP ProCurve Mobility Solution)

HP0-Y26 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y26.html


NO.1 You must use the web management interface of an HP MSM710 Controller to perform a manual
upgrade of the controller s software. In the management interface . which location must be specified as
the source for the software file?
A. TFTP server
B. your workstation
C. controller auxilary port
D. your FTP server
Answer: B

HP   HP0-Y26최신덤프   HP0-Y26 pdf   HP0-Y26

NO.2 Click the Exhibit button
What is the role of the HP ProCurve Switch 3500yl in the OSPF routing domain?
A. ABR in areas 5 and 0
B. ASBR in areas 5 and 0
C. internal router in area 5
D. internal router in area 0
Answer: A

HP   HP0-Y26시험문제   HP0-Y26   HP0-Y26기출문제   HP0-Y26

NO.3 what is the effect of the following command , entered at the CLI of an Hp ProCurve Switches 5412zl?
5412zl(ospf)#redistribute rip
A. The router will assume the role of ASBR
B. The router will become eligible for election as DR
C. The router will assume the role of ABR
D. The router will summarize RIP routes in OSPF LSAs
Answer: A

HP   HP0-Y26기출문제   HP0-Y26   HP0-Y26최신덤프   HP0-Y26 pdf

NO.4 On an HP ProCurve switch 8212zl, which feature must be enabled before you can enable VRRP?
A. IP routing
B. a dynamic routing protocol
C. MSTP
D. IP muticast
Answer: A

HP   HP0-Y26기출문제   HP0-Y26   HP0-Y26자격증   HP0-Y26

NO.5 You have verified that an HP ProCurve Switch 3500yl is correctly configured for PIM dense mode. The
witch s IGMP table shows active hosts that are memebers of multicast group 239.193.22.22. The muticast
is in progress, and all hosts are reciving the content ,However, the muticast group does not appear in the
witch s PIM route table.
What does this indicate about the 239.193.22.22 muticast group?
A. The switch is forwarding the muticast at Layer2.
B. Other muticast routers are configured for PIM sparse.
C. The server and IGMP hosts are in different VLANs.
D. The switch is Querier for the group.
Answer: A

HP   HP0-Y26   HP0-Y26덤프

NO.6 You have enable Dynamic ARP Protection on an HP ProCurve 5406zl switch.When is it necessary to
define IP-to MAC address bindings?
A. when you must lock down the switch s IP addresses to its base MAC address
B. when you must specify clients connected to untrusted ports
C. when you must identify devices that do not use DHCP,but have a static IP address assigned.
D. when you must protect uplink ports that connect to other swithes that do not support Dynamic ARP
Protection.
E. when you must provide sevurity to ports where different clients may connect at different times
Answer: C

HP자격증   HP0-Y26자격증   HP0-Y26

NO.7 You must design an MSTP solution for a customer network that uses HP ProCurve 5412zl switches in
the core and 3500yl switches at the edge. All switches will belong to single MST region. How can you
determine how may MST instances will be required to ensure that all links are in a forwarding state for at
least one VLAN?
A. Determine how many switches have identical VLAN configurations
B. Count the nubmer of redundant paths between the core and one edge switch.
C. Count the switches at the network edge
D. Determine the total number of VLANs configured on the switches.
Answer: B

HP자격증   HP0-Y26   HP0-Y26덤프   HP0-Y26 dumps   HP0-Y26

NO.8 You must configure an HP ProCurve Switch 8212zl to be the Backup router for a VRID associated with
VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A. It must be an address assigned to a muti-netted interface
B. It must be an address that is not assigned to any interface on either router.
C. It must match the Backup router s address for the VLAN 10 interface.
D. It must match the Owner router s address for the VLAN 10 interface
Answer: D

HP   HP0-Y26덤프   HP0-Y26인증   HP0-Y26

NO.9 You must configure an Hp ProCurve switch 8212zl to be the Owner of a VRID associated with VLAN 10.
What must e true of the virtual IP address for the VRID?
A. It must be an address on a muti-ntted interface
B. It must match the router s address for the VLAN 10 interface
C. It must match the address assigned to VLAN 10 on the Backup router.
D. It must use a classful network mask
Answer: B

HP   HP0-Y26   HP0-Y26   HP0-Y26

NO.10 A customer requires high levels of redundancy and availability for a critical business network that uses
two HP ProCurve 8212zl switches in the core. What is a potential advantage of deploying the VRRP on
thest switches?
A. It will enable the switches to learn redudant paths to remote networks
B. It will enable the switches to provide redundant default gateways to clicents.
C. It will enable the configuration of redundant gateways on VRRP-aware clients
D. It will enable the switches to provide redundant links to the distribution layer.
Answer: B

HP   HP0-Y26   HP0-Y26   HP0-Y26 pdf

우리ITExamDump가 제공하는 최신, 최고의HP HP0-Y26시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.


댓글 없음:

댓글 쓰기