IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Cisco인증 350-040덤프로Cisco인증 350-040시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
ITExamDump 에서 출시한 Cisco인증350-040시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Cisco인증350-040덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.
IT업계 종사자라면 누구나 Cisco 인증350-040시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? Cisco 인증350-040 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테Cisco 인증350-040시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의Cisco 인증350-040시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
지금 같은 정보시대에, 많은 IT업체 등 사이트에Cisco 350-040인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Cisco 350-040자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Cisco인증 350-040시험은 무조건 패스해야 합니다. 하지만Cisco인증 350-040시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Cisco인증 350-040시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Cisco인증 350-040덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Cisco인증 350-040영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: 350-040
시험 이름: Cisco (CCIE Storage Networking)
350-040 덤프무료샘플다운로드하기: http://www.itexamdump.com/350-040.html
NO.1 Refer to the exhibit. The fabric containing Switch A is merging with the fabric containing Switch B.
Which switch will become the principal switch, and why?
A. Switch A, because its principal switch priority value is lower
B. Switch B, because its principal switch priority value is higher
C. Switch A, because its principal switch WWN is lower
D. Switch B, because its principal switch WWN is higher
E. not enough information has been given
Answer: A
Cisco기출문제 350-040자료 350-040자격증 350-040시험문제 350-040자격증
NO.2 Which three of these are attributes of the 8B/10B encoding scheme used by Fibre Channel? (Choose
three.)
A. facilitates a sufficient number of one-to-zero transitions to enable clock recovery
B. maintains DC balance
C. detects all transmission errors
D. provides variable bit, byte, and word rates
E. generates special characters beyond the eight-bit code space
Answer: ABE
Cisco시험문제 350-040기출문제 350-040 350-040
NO.3 Which three of these statements about the E_D_TOV are correct? (Choose three.)
A. It is a timer with a default value of 100 ms that is used by the receiver logic to detect loss of
synchronization.
B. It is a timer with a default value of two seconds that is used for detecting protocol error conditions.
C. It is a timer used as the timeout value for determining when to reinstate a Recovery_Qualifier.
D. During fabric login, it is negotiated by the N_Port and the fabric as one of the common service
parameters exchanged.
E. It represent a limit on the amount of time within which an action can be taken after the transmission of
consecutive data frames within a single sequence.
Answer: BDE
Cisco 350-040 350-040인증
NO.4 What is the function of the Link Reset Protocol within the Link Control Facility?
A. it is part of the LIP process
B. it is used only for Class 1 connection removal
C. it is used to arbitrate on loops to recover from loss of synchronization
D. it is used following a link failure and controls the NOS and LOS substates
E. it is used following a link timeout or connection error and controls the LR and LRR substates
Answer: E
Cisco dumps 350-040 350-040기출문제 350-040 dump 350-040
NO.5 What is the purpose of the Open Fiber Control system?
A. It defines the flow control mechanism for Fibre Channel.
B. It defines the mechanism by which Fibre Channel switches communicate with Gbics.
C. It defines a safety mechanism for shutting down laser data links.
D. It defines the distance limitations for different types of lasers.
E. It specifies the maximum bit error rate for Fibre Channel links.
Answer: C
Cisco 350-040 350-040
NO.6 Fibre Channel Protocol is a protocol consisting of several layers. What are these layers, in order from
FC-0 to FC-4?
A. Media, Encode and Decode, Framing and Control, Common Services, Upper Level Protocol
B. Encode and Decode, Media, Framing and Control, Common Services, Upper Level Protocol
C. Framing and Control, Encode and Decode, Media, Common Services, Upper Level Protocol
D. Upper Level Protocol, Common Services, Framing and Control, Encode and Decode, Media
E. Media, Framing and Control, Encode and Decode, Common Services, Upper Level Protocol
Answer: A
Cisco dumps 350-040기출문제 350-040
NO.7 The Domain Identifier Assigned (DIA) SW_ILS command indicates which two of these? (Choose two.)
A. a principal switch has been selected and the upstream neighbor switch has been assigned a domain
identifier
B. the principal switch selection and address assignment phase has been completed and the fabric is
operational
C. the receiving switch can proceed to request a domain identifier
D. the principal switch selection has been started, but a principal switch has not been identified yet
E. a Request Domain Identifier SW_ILS frame has been received by the principal switch
Answer: AC
Cisco 350-040자료 350-040인증 350-040기출문제
NO.8 Is the iSNS client supported on VRRP interfaces?
A. yes
B. no
C. only when the storage_services_enabler_pkg license is enabled on the switch
D. only on Cisco IPS line cards
Answer: B
Cisco dumps 350-040 350-040 dumps 350-040 dumps
NO.9 In which of these situations will a fabric zone merge failure occur between fabric A and fabric B?
A. the active zone sets in both fabric A and fabric B are an exact match before the merge is attempted
B. the active zone set in fabric A has more zones than the active zone set in fabric B
C. a zone in fabric A contains three members, while a zone with the same name in fabric B contains four
members
D. zone names used in fabric A are 10 characters, while the zone names in fabric B contain fewer than 10
characters
E. a zone name in fabric A is different from a zone name in fabric B but the zone members in the two
zones are the same
Answer: C
Cisco 350-040 pdf 350-040 350-040인증 350-040덤프
NO.10 Which two events will trigger a port to start a Link Initialization Protocol procedure? (Choose two.)
A. the power is turned on
B. a LOGO ELS command is received
C. an internal reset is performed
D. an interface SHUT command is issued
E. an RSCN is received
Answer: AC
Cisco인증 350-040 350-040기출문제 350-040시험문제
NO.11 What Fibre Channel transport functions can be found at the FC-2 level?
A. Exchange Operation, Information Unit, and Sequence
B. Session, Exchange, and Information Unit
C. Sequence, Frame, and Flow Control
D. Sequence, Frame, and Information Unit
E. Exchange Management, Link Control, and Flow Control
Answer: C
Cisco pdf 350-040인증 350-040 350-040
NO.12 What makes the R_CTL field valuable to Extended Link Services?
A. It uses hex'03' for all request frames and hex'02' for all reply frames.
B. It uses hex'02' for all request frames and hex'03' for all reply frames.
C. It uses hex'00' for all request frames and hex'01' for all reply frames.
D. It uses hex'02' for all request and reply frames (the ILS request and reply frames are not differentiated
by the R_CTL field).
E. It does not have a fixed value and the value depends on the specific Internal Link Service.
Answer: B
Cisco pdf 350-040 350-040자격증 350-040인증
NO.13 What Fibre Channel header field indicates the frame is a Link Control frame?
A. R_CTL
B. CS_CTL
C. TYPE
D. F_CTL
E. DF_CTL
Answer: A
Cisco dump 350-040최신덤프 350-040 pdf 350-040 pdf 350-040덤프
NO.14 Which two statements are true? (Choose two.)
A. Fabric logins are sent to destination FC-ID 0xFFFFFA.
B. Fabric logins are sent to destination FC-ID 0xFFFFFC.
C. FSPF HLO packets are sent from source FC-ID 0xFFFFFD.
D. FC-ID 0xFFFFFA is reserved for the management server.
E. Name server logins are sent to destination FC-ID 0xFFFFFD.
Answer: CD
Cisco덤프 350-040자격증 350-040 350-040
NO.15 Which of these TCP ports does iSNS use?
A. 3205
B. 3225
C. 3226
D. 3325
Answer: A
Cisco dumps 350-040최신덤프 350-040 350-040 dumps 350-040자격증
NO.16 What SW_ILS frame is used to perform principal switch selection?
A. RDI
B. DIA
C. EFP
D. ELP
E. ESC
Answer: C
Cisco 350-040 dump 350-040최신덤프
NO.17 Can Cisco Fabric Services be used to distribute iSCSI initiator configurations?
A. yes
B. no
C. only when the SAN_EXTN_OVER_IP_18_4 license is installed on the switch
D. only when ENTERPRISE_PKG is installed on the switch
Answer: A
Cisco기출문제 350-040 dumps 350-040
NO.18 In Cisco MDS, how is a pWWN assigned to a dynamically assigned iSCSI?
A. by the system
B. by the user in the configuration of the iSCSI target
C. by the iSCSI host
D. created with iSCSI host name, iSCSI driver, and Connection ID
E. by the storage system attached to Fibre Channel
Answer: A
Cisco dump 350-040 350-040 350-040 dumps
NO.19 The Class 2 class of service always uses end-to-end acknowledgments (ACK, BSY or RJT) for every
data frame. What else is true of Class 2?
A. It is an "unreliable" datagram service that does not guarantee fixed latency or in-order delivery.
B. It is a "reliable" datagram service that guarantees fixed latency and in-order delivery.
C. It is a "reliable" datagram service that does not guarantee fixed latency but guarantees in-order
delivery.
D. It is a "reliable" datagram service that does not guarantee fixed latency or in-order delivery.
Answer: D
Cisco 350-040 dump 350-040기출문제 350-040 dumps 350-040덤프
NO.20 During principal switch selection and domain ID assignment, all frames are flooded to a destination ID
of what well-known Fibre Channel address?
A. FF.FF.FA
B. FF.FF.FB
C. FF.FF.FC
D. FF.FF.FD
E. FF.FF.FE
Answer: D
Cisco자료 350-040자격증 350-040 350-040 pdf 350-040
NO.21 Which two of these are effects of a BF SW_ILS? (Choose two.)
A. It causes a disruptive reconfiguration of the fabric.
B. It causes a non-disruptive reconfiguration of the fabric.
C. It causes a new principal switch selection to happen.
D. It causes all the assigned addresses in the fabric to be changed, while avoiding traffic loss by holding
data traffic.
E. It helps to resolve overlapping domain identifiers.
Answer: BC
Cisco인증 350-040시험문제 350-040 350-040
NO.22 All of these are functions of LIP except which one?
A. reinitialize a loop
B. perform passive attachment to loop
C. indicate loop receiver failure
D. indicate which port to reset on loop
E. acquire an AL_PA
Answer: B
Cisco 350-040 350-040덤프
NO.23 What set of primitive signals is valid for arbitrated loop?
A. NOS, LOS, LR, LRR
B. SOF, EOF, ABTS, ACK
C. LIFA, LIPA, LIHA, LISA
D. LIP, LR, LRR, SOF
E. CLS, OPN, ARB
Answer: E
Cisco 350-040자료 350-040자격증 350-040
NO.24 What is the correct configuration to place initiator ABC.icq into VSANs 3 and 66 exclusively?
A. iscsi initiator name ABC.iqn
vsan 3 66
B. iscsi initiator name ABC.iqn
no vsan 1
vsan 3 - 66
C. iscsi initiator name ABC.iqn
no vsan 1
vsan 3
vsan 66
D. iscsi initiator name ABC.iqn
vsan member vsan 3
vsan 66
E. iscsi initiator name ABC.iqn
vsan member vsan 3,66
Answer: C
Cisco 350-040 dumps 350-040
NO.25 What ordered set is used to determine the class of a frame?
A. COF
B. SYN
C. SOF
D. TYP
E. LIP
Answer: C
Cisco 350-040 dump 350-040자격증 350-040 350-040자격증
NO.26 If a Fibre Channel interface is receiving an NOS pattern on its interface, what pattern will the interface
be transmitting?
A. OLS
B. LR
C. LRR
D. IDLE
E. NOS
Answer: A
Cisco 350-040 350-040 pdf 350-040덤프
NO.27 Which two of these statements about the R_T_TOV are true? (Choose two.)
A. It is a timer with a default value of 100 ms that is used by the receiver logic to detect loss of
synchronization.
B. It is a timer with a default value of 100 ms that it is used for detecting protocol error conditions.
C. Its values is two times that of E_D_TOV, and it is used as the timeout value for determining when to
reinstate a Recovery_Qualifier.
D. It is negotiated between the N_Port and the fabric during the fabric login as one of the common service
parameters exchanged.
E. It is used to time events occurring on a single link.
Answer: AE
Cisco 350-040인증 350-040덤프
NO.28 Which configuration command enables all discovered storage to be available for iSCSI?
A. iscsi virtual-target all
B. iscsi target enable fc
C. fc-target import iscsi
D. enable fc targets dynamic
E. iscsi import target fc
Answer: E
Cisco 350-040 350-040 350-040
NO.29 Which three of these Fibre Channel words are known as primitive signals? (Choose three.)
A. NOS
B. R_RDY
C. CLS
D. LIP
E. IDLE
Answer: BCE
Cisco시험문제 350-040 pdf 350-040 dump 350-040 dumps
NO.30 Which of these is used to identify the special characters used in Fibre Channel encoding?
A. K28.5
B. 8B/10B
C. 3B/4B
D. D28.5
E. idle
Answer: A
Cisco덤프 350-040 350-040 350-040덤프 350-040덤프
만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는Cisco 350-040관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게Cisco 350-040시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
댓글 없음:
댓글 쓰기